Chronoswiss Sirius Flying Regulator Bi-Colour Version
In the new bicolour version of Chronoswiss Sirius Flying Regulator, stainless steel and red gold form an elegant bond together.
The Flying Regulator in its stainless steel case just about beams with its red gold accents: Both the dominantly designed, polished bezel and its typical onion-shape crown are made of solid, 18-karat red gold.
Gold-plated screws, hands and bases skillfully continue the theme on the dial. The lower level of the dial features the characteristic guilloche design specially developed in the studios of the House of Chronoswiss.
Additional excitement is lent to the guilloche pattern through the galvanization, which casts it in a dark night blue.
Technical details
Model: Sirius Flying Regulator
Reference: CH-1242.3-BLBL Stainless steel case; bezel and crown in solid 18-karat red gold, dial in galvanic blue
Displays
Off-centre hours at 12:00, central minutes, small seconds at 6:00
Case
Solid stainless steel case, with satin finish and polished bezel (18-karat red gold) with side knurling and curved, non-reflecting sapphire crystal; screw-down case back with satin finish and flat sapphire crystal, onion crown in solid 18-karat red gold; water resistance up to 3 bar; strap bars screwed in with patented Autobloc system
Dimensions: Ø 40 mm, height 11.80 mm
Movement
Chronoswiss manufacture caliber C.122, automatic
Diameter: Ø 26.80 mm (11 ¾´´)
Height: 5.30 mm
Jewels: 30
Balance: Glucydur, three-legged
Balance spring: Nivarox I
Fine adjustment: Index via eccentric cam
Shock protection: Incabloc
Frequency: 3 Hz., 21,600 A/h (semi-oscillations)
Power reserve: Approx. 45 hours
Finish: Gold-plated, skeletonised rotor with Geneva Stripes, ball bearing mounted; circular-grained plate; bridges with Geneva Stripes and circular-grained offsets; gold-plated engraving and jewel settings; polished lever, escape wheel and screws
Dial
Elaborate construction on two levels: bottom level galvanized guilloche, upper level with satin finish, mounted on screwed plinths
Watch hands: Shape Poire Stuart; curved and gold-plated and diamond cut or lacquered
Strap
Louisiana alligator leather; pin buckle in bicolor
