Roger Dubuis Excalibur Liu Wei Monotourbillon Limited Edition

Swiss luxury watch brand Roger Dubuis introduces the fourth timepiece from its Urban Culture Tribe with the Excalibur Liu Wei Monotourbillon (MT).

Roger Dubuis Excalibur Liu Wei Monotourbillon Limited Edition

Limited to just eight pieces, this Excalibur timepiece was created in collaboration with multi-talented visual artist Liu Wei. It comes with a manual-winding skeleton movement featuring a Flying Monotourbillon mechanism.

This hand-wound skeleton calibre comes with an increased power reserve up to 72 hours thanks to tourbillon carriages made in titanium and cobalt chrome, improved durability thanks to new lube.

Roger Dubuis Excalibur Liu Wei Monotourbillon Limited Edition

The star-shaped bridge has been redesigned by Liu Wei and is enhanced by sapphire crystal dials with luminescent micropainting on both sides. The geometric micropainting is extending to the rubber base strap.

Roger Dubuis Excalibur Liu Wei Monotourbillon Limited Edition

Every single component of the Roger Dubuis Excalibur Liu Wei watch is finished by hand. Moreover, it complies with Poinçon de Genève, one of the most respected certifications of Haute Horlogerie.

Roger Dubuis Excalibur Liu Wei Monotourbillon Limited Edition

Technical details

Model: Roger Dubuis Excalibur Liu Wei Monotourbillon Limited Edition
Reference RDDBEX1028

Movement
Calibre RD512
Manual-winding, skeleton, Flying Monotourbillon
Finishing: Shot-blasted and trued-up main plate and bridges
Frequency: 3 Hz / 21’600 Vibrations per Hour
Power reserve: 72 Hours
Diameter lines: 16
Thickness: 6.9 Millimeters
Number of pieces: 194
Number of rubies: 19

Functions
Hours, minutes
Flying Monotourbillon

Case
Titanium case
Diameter: 42 Millimeters
Titanium bezel
Titanium crown
Sapphire crystal with anti-reflective coating
Titanium open case back with sapphire crystal
Water resistance: 10 BAR (100m)

Dial
Sapphire crystal dials with UV micropainting, interleaved with redesigned star-shaped bridge

Hands
Triple surface hands in white gold 750/1000 with satin brushed finish on the tilted surfaces – shot-blasted finish on the flat grey surface, SLN tips

Strap
Premium calf leather strap
The strap is interchangeable thanks to Quick Release System
Buckle: Titanium cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Roger Dubuis Excalibur DT White Ceramic and EON GOLD Boutique Edition

This limited edition boutique exclusive watch blends the precious EON GOLDTM and White Ceramic. Inside this timepiece beats a manual-winding Skeleton double flying tourbillon movement manufactured in the Roger Dubuis workshop in Geneva.

Roger Dubuis Excalibur DT White Ceramic and EON GOLD Boutique Edition

It has a white ceramic case measuring 45mm diameter. The crown, bezel and the case-back ring are made of EON GOLDTM, a specific 750/1000 5N gold alloy that is more resistant to tarnishing when exposed to extreme conditions.

Roger Dubuis Excalibur DT White Ceramic and EON GOLD Boutique Edition

Re-engineered and improved performances with a power reserve of 72 hour, better resistance to magnetism thanks to tourbillon carriages made in titanium and cobalt-chrome.

Roger Dubuis Excalibur DT White Ceramic and EON GOLD Boutique Edition

Two tourbillons linked with a differential directly connected to the second wheel of the gear train for a better transmission of the energy.

Roger Dubuis Excalibur DT White Ceramic and EON GOLD Boutique Edition

The skeleton calibres manufactured by Roger Dubuis comply with one of the most respected certifications of Haute Horlogerie, the Poinçon de Genève.

Roger Dubuis Excalibur DT White Ceramic and EON GOLD Boutique Edition

This Excalibur Skeleton double flying tourbillon watch is limited to 8 pieces.

Technical details

Movement
Calibre RD108
Manual-winding Skeleton double flying tourbillon movement
Functions: Hours, minutes
Frequency: 3 Hz / 21’600 Vibrations per Hour
Power reserve: 72 Hours
Diameter lines: 16 3/4
Thickness: 7.35 Millimeters
Number of pieces: 319
Number of rubies: 32
Finishing: Shot-blasted, trued-up or circular-grained main plate and bridge with NAC coating

Case
White Ceramic case with sapphire crystal with anti-reflective coating
EON gold bezel
EON gold crown
EON gold open case back with sapphire crystal
Case diameter: 45 Millimeters
Water resistance: 10 Bar (100m)

Dial
White Mineral Composite Fiber double surface flange with engraved minute track and transferred texts, polished and pink gold 750/1000 plated hour markers with SLN in the center

Hands
Triple surface hands in pink gold with satin brushed finish on the tilted surfaces and shot-blasted finish on the flat grey surface, SLN tips

Strap
Premium calf leather strap
The strap is interchangeable thanks to Quick Release System.
Pink gold cover 750/1000 with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Roger Dubuis Excalibur Spider Pirelli MT Limited Edition

Roger Dubuis has launched Excalibur Spider Pirelli MT, a watch specifically developed for the 150th anniversary of Pirelli.

Roger Dubuis Excalibur Spider Pirelli MT Limited Edition

This boutique exclusive, manual-winding watch incorporates the emblematic Flying Monotourbillon complication with a power reserve indicator. Certified by Geneva seal, the Roger Dubuis Excalibur Spider Pirelli MT is a limited edition of eight pieces.

Roger Dubuis Excalibur Spider Pirelli MT Limited Edition

The mechanical skeleton flying tourbillon calibre is the signature of Roger Dubuis highly-skilled watchmakers. Placed at 7 o’clock, the flying tourbillon makes one rotation in 60 seconds. Inspired by the motorsport universe, the calibre includes a power reserve indicator built like a fuel Gauge.

Roger Dubuis Excalibur Spider Pirelli MT Limited Edition

The watch is delivered with 3 additional kits featuring the colors of the 150th anniversary of Pirelli. The colors offered are: silver, gold and red. The new QRS system allows the owner to change the bezel, crown and strap in a matter of seconds.

Roger Dubuis Excalibur Spider Pirelli MT Limited Edition

This timepiece comes with an exclusive strap made of winning motorsport tire rubber. It features inlays made of real tire rubber which have won one of the most demanding motorsport competitions in the world.

Roger Dubuis Excalibur Spider Pirelli MT Limited Edition

In addition to that, the design of the strap displays Pirelli patterns on the inside, reflecting the style and performance of the Italian manufacturer.

Technical details

Model: Roger Dubuis Excalibur Spider Pirelli MT
Reference RDDBEX1036

Movement
Calibre RD508SQ
Manual-winding skeleton movement with power reserve display and flying monotourbillon
Circular-grained main plate
Bridges with rhodium plating
Trued-up anchor bridges with rhodium plating
Frequency: 3 Hz / 21’600 Vibrations per Hour
Power reserve: 60 Hours
Diameter lines: 16
Thickness: 5.92 Millimeters
Number of pieces: 265
Number of rubies: 29

Functions
Hours, minutes, power reserve indicator
Flying tourbillon

Case
White MCF (Mineral composite fibre) case with titanium container
White MCF (Mineral composite fibre) bezel with sapphire crystal and anti-reflective coating, interchangeable with QRS – Quick Release System
Titanium open case back with sapphire crystal and metallized Pirelli logo
Rubber crown interchangeable with QRS – Quick Release System
Diameter: 45 Millimeters
Water resistance: 5 bar (50m)

Dial
White lower flange with transfered texts and minute track
White upper flange with Rhodium plated screw-like hour markers filled with SLN

Hands
White gold 750/1000 hour and minute hands
Black outlined tips filled with SLN

Strap
White rubber strap with white rubber inlay with fused SLN on the 150th anniversary logo, white stitches. Interchangeable with Quick Release System

Buckle
Titanium cover with titanium blades, triple-folding, interchangeable with Quick Release System – QRS

Roger Dubuis Excalibur Soho Edition Monobalancier RDDBEX1029

This exclusive timepiece was created to mark the opening of the Roger Dubuis in the upscale Soho shopping district in New York.

Roger Dubuis Excalibur Soho Edition MB, RDDBEX1029

Made of Mineral Composite Fiber, this 42mm watch is equipped with the Automatic calibre RD820SQ, a high-end contemporary skeleton movement manufactured by Roger Dubuis in Geneva. The white composite material case of the watch is fitted on a white rubber strap with Red tag.

Roger Dubuis Excalibur Soho Edition MB, RDDBEX1029

Like all Excalibur watches, Roger Dubuis Excalibur Soho Edition Monobalancier complies with one of the most respected certifications of Haute Horlogerie, the Poinçon de Genève.

Technical details

Model: Roger Dubuis Excalibur Soho Edition MB, RDDBEX1029

Case
MCF (Mineral composite fiber) case, bezel and crown
Sapphire crystal with anti-reflective coating
Diameter of the case: 42 Millimeters
Titanium open case back with sapphire crystal
Water resistance: 5 BAR (50m)

Dial
White flange with transferred Red minute track and texts
Rhodium hour markers

Hands
Faceted white gold hands
One surface polished, the other shot-blasted
SLN in the centre

Movement
Calibre RD820SQ
Skeleton calibre with a star-shaped bridge
Automatic movement with micro-rotor
Movement finishing: Circular-grained main plate and bridges with NAC coating. Trued up anchor bridge with Rhodium and Red Plating
Power reserve: 60 Hours
Number of pieces: 166
Number of rubies: 35
Diameter (lines): 16
Thickness: 6.38 Millimeters
Frequency: 4 Hz/ 28’800 vibrations per Hour
Certified by the Poinçon de Genève

Functions
Hours, minutes

Bracelet
White rubber strap with Red tag
Adjustable folding buckle, titanium cover with stainless steel blades, double folding

Edition
Limited edition of 8 pieces
Boutique exclusive SOHO, United States

Roger Dubuis Excalibur Spider Huracan MB Limited Edition RDDBEX1006

This motorsports inspired limited edition ROGER DUBUIS watch was created in partnership with Lamborghini, the super car manufacturer from Italy. Limited to 88 pieces, the Excalibur Spider Huracan MB houses an automatic twin-barrel movement built like an engine of a racing car.

Roger Dubuis Excalibur Spider Huracan MB Limited Edition RDDBEX1006

The Roger Dubuis Excalibur Spider Huracan Monobalancier (MB) features white Mineral Composite Fiber case and bezel. Fitted with a titanium open case back with sapphire crystal, the watch is water resistant to 50 meters. It has a diameter of 45mm.

Exclusively developed in-house, Mineral Composite Fibre (MCF) is a high-tech material made of silica via a Sheet Molding Compound (SMC) process.

Roger Dubuis Excalibur Spider Huracan MB Limited Edition RDDBEX1006

The design of this new timepiece is inspired by the Huracán GT3 EVO2, including the honeycomb motif made famous by the supercar, with its hexagonal dashboard paralleled in the shape of the calibre.

Inspired by the automotive world, the self-winding RD630 movement was developed specifically for the partnership with Lamborghini Squadra Corse. The calibre with a twin barrel power supply offers a power reserve of 60 hours.

Roger Dubuis Excalibur Spider Huracan MB Limited Edition RDDBEX1006

The calibre structure is designed like a super-car engine with strut-bars forming a clear and visible visual signature. The rotor is designed like a super car wheel rim.

Roger Dubuis Excalibur Spider Huracan MB Limited Edition RDDBEX1006

The Roger Dubuis Excalibur Spider Huracan MB limited edition model comes with a rubber and perforated calf leather Interchangeable strap with quick release system.

Technical details

Model: Roger Dubuis Excalibur Spider Huracan MB

Movement
Calibre RD630
Automatic, self-winding
Shot-blasted main plate
Shot-blasted, trued-up bridges
12° tilted balance
Twin barrel
Rotor designed like a wheel rim
NAC coated
Frequency: 4 Hz / 28’800 Vibrations per Hour
Diameter lines: 16
Thickness: 7.78 Millimeters
Number of pieces: 233
Number of rubies: 29
Power reserve: 60 Hours

Functions
Hours, minutes, central second, date

Case
White MCF (Mineral composite fibre) case with titanium container and green rubber inlay
White MCF (Mineral composite fibre) bezel with lacquered markings and sapphire crystal with antireflective coating
Titanium open case back with sapphire crystal and metallized Excalibur Huracàn logo
Titanium crown with yellow lacquered ring
Case diameter: 45 Millimeters
Water resistance: 5 BAR (50m)

Dial
Green lower flange with white transferred texts and minute tracks
White upper Flange with screw-like hour markers rhodium plated, filled with yellow SLN

Hands
White gold 750/1000 hour and minute hands. Yellow outlined tips filled with SLN
Second hand with yellow lacquer

Strap
White rubber strap with green perforated calf leather inlay, inner color of the holes is red, interchangeable with Quick Release System – QRS

Buckle
Titanium cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Roger Dubuis Excalibur Sorayama MB Limited Edition

Hyper luxury Swiss watch manufacture Roger Dubuis has created a limited edition Excalibur Monobalancier timepiece in collaboration with world-famous Japanese artist Hajime Sorayama.

Roger Dubuis Excalibur Sorayama MB Limited Edition

Limited to 28 pieces, this Poinçon de Genève certified timepiece is presently available in Japan only. This 42mm timepiece in titanium is equipped with a modern Roger Dubuis mechanical skeleton movement.

Roger Dubuis Excalibur Sorayama MB Limited Edition

The skeleton calibres manufactured by Roger Dubuis in Geneva are the essence of the expressive singularity of the Excalibur collection. Every single component being finished by hand, the watches are symbols of passion.

Roger Dubuis Excalibur Sorayama MB Limited Edition

Developed for the new generation Excalibur watches, the Roger Dubuis Calibre RD720SQ comes with improved performances. It offers an increased power reserve up to 72 hours thanks to a new gear train toothing and escapement optimization through its geometry. Improved durability thanks to new lube, and increased precision thanks to 4hz frequency.

Roger Dubuis Excalibur Sorayama MB Limited Edition

The new Roger Dubuis Excalibur Monobalancier watch created in partnership with Hajime Sorayama mixes both creative territories of the artist and the brand.

Roger Dubuis Excalibur Sorayama MB Limited Edition

Hajime Sorayama is known worldwide for his works in fine art, illustration and industrial design. His notable works include the initial design of first generation of Sony AIBO robots and the pin-up works for men’s magazines like Penthouse.

Roger Dubuis Excalibur Sorayama MB Limited Edition

The star-shaped bridge redesigned by Sorayama, turns curvy and full polished, same as the titanium case and bracelet, like an echo of his metallic 3D sculptures. The micro rotor displays a moiré effect, with a fixed fringed sapphire glass and a mobile engraved metallic part, to remind the artist’s obsession about light reflection.

Roger Dubuis Excalibur Sorayama MB Limited Edition

The white lacquered box is adorned with hot-stamped Roger Dubuis with Sorayama font.

The Excalibur Sorayama MB watch comes with a polished titanium bracelet. It is the first Roger Dubuis grade 5 titanium bracelet to feature its Quick Release System.

Technical details

Model: Roger Dubuis Excalibur Sorayama MB Limited Edition
Reference RDDBEX1013

Movement
Calibre RD720SQ
Automatic, self-winding
Monobalancier
Frequency: 4 Hz / 28’800 Vibrations per Hour
Diameter: 16 3/4 Lines
Thickness: 5.95 millimeters
Number of components: 178
Number of rubies: 32
Power reserve: 72 Hours
Finishing: Shot-blasted and trued-up main plate and bridges with NAC

Functions
Hours, minutes

Case
Case, bezel and crown in polished titanium
Sapphire crystal with anti-reflective coating
Polished titanium open case back with sapphire crystal
Diameter: 42 Millimeters
Water resistance: 10 BAR (100m)

Dial
Rhodium plated double surface flange with engraved minute track and transferred texts, polished and grey hour markers with SLN in the center

Hands
Triple surface hands in white gold 750/1000 with satin brushed finish on the tilted surfaces – shot-blasted finish on the flat grey surface, SLN tips

Strap
Full polished titanium bracelet, interchangeable with Quick Release System – QRS
Triple folding buckle titanium cover with titanium blades.

Roger Dubuis Excalibur Monobalancier Black Ceramic, RDDBEX0955

Roger Dubuis presents a new Black Ceramic version of its Excalibur Monobalancier watch that was unveiled during the Watches and Wonders 2022 luxury watch event.

Roger Dubuis Excalibur Monobalancier Black Ceramic, RDDBEX0955

The emblematic creations from Roger Dubuis, Excalibur watches comply with the Poinçon de Genève, one of the most respected certifications of Haute Horlogerie.

Roger Dubuis Excalibur Monobalancier Black Ceramic, RDDBEX0955

Monobalancier is the new development of the Excalibur collection. The new Excalibur Monobalancier comes with a calibre with improved performances. This movement boasts an increased power reserve up to 72 hours thanks to a new geartrain toothing and escapement optimization through its geometry. It also has improved durability thanks to new lube, and increased precision thanks to 4 Hz frequency.

Roger Dubuis Excalibur Monobalancier Black Ceramic, RDDBEX0955

The 42mm diameter case of this new model is made of ceramic. It is water resistant up to 100 meters. The watch comes with a black 3D calf leather strap, interchangeable with Quick Release System.

Technical details

Model: Roger Dubuis Excalibur Monobalancier Black Ceramic, RDDBEX0955

Movement
Calibre RD720SQ
Automatic, self-winding
Monobalancier
Finishing: Shot-blasted and trued-up main plate and bridges with NAC
Frequency: 4 Hz / 28’800 Vibrations per Hour
Power reserve: 72 Hours
Diameter lines: 16 3/4
Thickness: 5.95mm
Number of pieces: 178
Number of rubies: 32

Functions
Hours, minutes

Case
Ceramic case, bezel and crown
Sapphire crystal with anti-reflective coating
Titanium DLC open case back with sapphire crystal
Case diameter: 42 Millimeters
Water resistance: 10 BAR (100m)

Dial
Black double surface flange with engraved minute track and transferred texts, polished and Grey hour markers with SLN in the center
Hands: Triple surface hands in white gold 750/1000 with satin brushed finish on the tilted surfaces – shot-blasted finish on the flat grey surface, SLN tips

Strap
Black 3D calf leather strap, interchangeable with Quick Release System- QRS
Black DLC titanium cover with titanium blades, triple folding, interchangeable with Quick Release System -QRS

Roger Dubuis Excalibur Knights of the Round Table Monotourbillon

The Excalibur Knights of the Round Table is an iconic watch collection from the Geneva based Hyper Horology atelier Roger Dubuis. Inspired by the medieval legend, this series combines combine artistic mastery, horological craftsmanship and contemporary design. It now welcomes a new edition endowed with the emblematic Monotourbillon mechanism.

The very recognizable face of the Excalibur Knights of the Round Table watch is made of twelve micro-sculptures – the Knights – placed around a dial – the Table. The Knights are handcrafted in Pink Gold 750/1000 and represent the 12 characters involved in the quest. Each knight is just 6mm tall, created with his own personality and equipped with armour.

Roger Dubuis Excalibur Knights of the Round Table Monotourbillon

The table is made of gems or precious materials or materials requiring specific techniques, and symbolizes the unity and equality of the Knights. The watch houses an exceptional automatic calibre, manufactured in the Roger Dubuis workshops and certified by the Poinçon de Genève, one of the most demanding certifications in Haute Horlogerie.

In this new watch, the Knights of the Round Table levels up by offering a central monotourbillon calibre. The monotourbillon emerges from the center table. It is a new calibre specifically developed for this timepiece and certified by the Poinçon de Genève.

Roger Dubuis Excalibur Knights of the Round Table Monotourbillon

The centre table is made of crystal sapphire with color blocks in purple hues. The hands are also made of rotating crystal sapphire discs. The two gold markers indicate the position of the minute and hour with perfectly centred rotating discs. The translucent purple blocks are carved from Murano glass. They appear to levitate around the Monotourbillon. The double surfaced flange is carved from a single block of Murano glass too.

In keeping with the design, and to respect the position of the knight at 3 o’clock, the setting system is decentred to a position at 2 o’clock. Push down on this function and a small red flag indicates that the timepiece has moved from winding to setting mode.

Roger Dubuis Excalibur Knights of the Round Table Monotourbillon

The Roger Dubuis Excalibur Knights of the Round Table Monotourbillon features a 45mm diameter Pink Gold 750/1000 case sealed by a notched bezel. The timepiece comes with an embossed black calf-leather strap.

Technical details

Model: Roger Dubuis Excalibur Knights of the Round Table Monotourbillon
RDDBEX1025 – KNIGHTS OF THE ROUND TABLE MT/X

Movement
Caliber RD115
Manual-winding mechanical movement with flying Monotourbillon
Central flying monotourbillon with variable inertia balance wheel, including 72 hours of power reserve
Finishing: Shot-blasted, trued-up and circular grained plate and bridges with NAC coating
Frequency: 3 Hz / 21’600 Vibrations per Hour
Power reserve: 72 Hours
Diameter lines: 16
Thickness: 12.2 Millimeters
Number of pieces: 277
Number of rubies: 29

Functions
Hour, minute
Flying Monotourbillon

Case
Pink gold case with sapphire crystal with anti-reflective coating
Pink gold open case back with sapphire crystal and metallization
Pink gold bezel with sapphire crystal ring
Pink gold crown with Murano glass ring
Diameter: 45 Millimeters
Water resistance: 3 BAR (30m)

Dial
Sapphire crystal centre table with color blocks made of Murano glass
12 micro-sculpted knights in pink gold, representing the 12 knights involved in the Quest
Double surface flange in Murano glass with polished pink gold hour markers
Rotating sapphire crystal discs with golden blocks as hour and minute hands

Strap
3D calf leather strap, interchangeable with Quick Release System – QRS

Buckle
Pink gold cover 750/1000 with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Edition
Limited edition of 8 pieces
Boutique Exclusive

Certification
Poinçon de Genève

Roger Dubuis Excalibur Monobalancier

Roger Dubuis presents Excalibur Monobalancier, the latest evolution of the iconic Excalibur collection.

For the inaugural Monobalancier edition, Roger Dubuis used EON GOLDTM, a specific 750/1000 5N gold alloy that is more resistant to tarnishing when exposed to extreme conditions.

Roger Dubuis Excalibur Monobalancier watch

Both contemporary and sophisticated, this Excalibur watch comes with a series of mechanical and aesthetic improvements.

Roger Dubuis Excalibur Monobalancier watch with EON GOLD case and diamond-set bezel

Inside the watch beats RD 720SQ calibre, a brand new self-winding movement with improved performance. It offers increased power reserve up to 72 hours thanks to a new gear-train toothing and escapement optimization through its geometry. It also has improved durability thanks to new lube, and increased precision thanks to 4 Hz frequency.

Roger Dubuis Excalibur Monobalancier watch with EON GOLD case

The micro-rotor is optimised to minimise its vibrations, and crafted from Pink Gold 750/1000 and Tungsten finished with an engraving of the Roger Dubuis’ monogram to modernise its design.

Roger Dubuis Excalibur Monobalancier watch with EON GOLD case

The Maison has doubled the balance wheel inertia to improve stability and make it less sensitive to shocks. In the same way, better efficiency and energy transmission is achieved by optimising the shape of the escapement wheel, now constructed from diamond-coated silicon, and paired with adjustable, diamond-coated silicon pallet-stones, and a new lube.

Roger Dubuis Excalibur Monobalancier watch with EON GOLD case and diamond-set bezel

The Excalibur Monobalancier watch comes with clean cut lines, fluted bezel and sharp notches, while the signature star is reshaped to levitate freely above the barrel.

Roger Dubuis Excalibur Monobalancier watch with EON GOLD case and diamond-set bezel

A contemporary approach is further evident in the decorations amplifying the expressive nature of this 42mm timepiece, including highly contrasted decorations such as sandblasted, satin-brushed surfaces, and polished angles.

Roger Dubuis Excalibur Monobalancier watch with EON GOLD case
Meeting the exceptional high standards of the Poinçon de Genève, two editions are available, one with an EON GOLDTM case and an embossed black calf-leather strap, the other one also with an EON GOLDTM case and adorned with 60 round-cut diamonds and an embossed purple calf-leather strap.

Roger Dubuis Excalibur Monobalancier watch with EON GOLD case and diamond-set bezel

Both straps feature a patented Quick Release System.

Technical details

Model: Roger Dubuis Excalibur Monobalancier

Versions
RDDBEX0953: With EON GOLD case and diamond-set bezel
RDDBEX0954: With EON GOLD case

Movement
Calibre RD720SQ
Automatic, self-winding movement with Monobalancier
Finishes: Shot-blasted and trued-up main plate and bridges
Functions: Hours, minutes
Frequency: 4 Hz / 28’800 Vibrations per Hour
Power reserve: 72 Hours
Diameter lines: 16 3/4
Thickness: 5.95 Millimeters
Number of pieces: 178
Number of rubies: 32

Case
EON GOLD case
EON GOLD crown
EON GOLD open case back
Sapphire crystal with anti-reflective coating
Diameter: 42 Millimeters
Water resistance: 10 BAR (100m)

Bezel
RDDBEX0954: EON GOLD bezel
RDDBEX0953: EON GOLD bezel set with round diamonds

Dial
RDDBEX0953: Pink gold plated double surface flange with engraved minute track and transferred texts, polished and black hour markers with SLN in the center. Triple surface hands in pink gold 750/1000 with satin brushed finish on the tilted surfaces and shot-blasted finish on the flat grey surface, SLN tips.
RDDBEX0954: Grey double surface flange with engraved minute track and transferred texts, polished and pink gold plated hour markers with SLN in the center. Triple surface hands in pink gold 750/1000 with satin brushed finish on the tilted surfaces and shot-blasted finish on the flat grey surface, SLN tips.

Strap
RDDBEX0953: Purple 3D calf leather strap, interchangeable with Quick Release System – QRS
RDDBEX0954: Black 3D calf leather strap, interchangeable with Quick Release System – QRS

Buckle
Pink gold cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Gem-setting
RDDBEX0953: Bezel set with 60 diamonds, G White, Round

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition

In 2021, Roger Dubuis introduced the new evolution of the Excalibur Double Tourbillon watch. Now, the Geneva based high horology Maison unveils its latest variation in radiant black ceramic.

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition
This new ceramic watch is driven by the Roger Dubuis RD108 mechanical calibre. Boasting two signature tourbillons, this enhanced horological engine represents a feat of enhanced precision and technical prowess. Both tourbillons are rebuilt with lighter materials and an enhanced differential to maximise the transmission of energy.

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition

Its tourbillon lower carriage is made in titanium for improving energy efficiency and upper tourbillon carriage in cobalt chrome for better finishing: mirror polish. Both titanium and cobalt chrome are anti-magnetic. Manually wind, the RD108 calibre offers an impressive power reserve of 72 hours.

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition
This extremely complex mechanical skeleton movement’s sense of transparency and 3D depth is heighted by the Roger Dubuis star levitating freely above the barrel. Clean cut lines on both the 45mm case and movement create its strong visual identity and give the impression of a thinner look and feel.

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition

This dynamic aesthetic is amplified by its decorations, hand-finished with precision and rewarded with the Poinçon de Geneve; one of the most demanding signatures in fine watchmaking.

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition

Hyper durable and expressive, the latest variation of the Excalibur Double Tourbillon debuts with a radiant black ceramic case, striking in its intensely high scratch-resistance.

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition

Limited to just 28 pieces, this timepiece comes with a black calf-leather strap with versatile Quick Release System.

Roger Dubuis Excalibur Double Tourbillon Black Ceramic Limited Edition

Technical details

Model: Roger Dubuis Excalibur Double Tourbillon Black Ceramic
RDDBEX0820 – EXCALIBUR – EXCALIBUR DT

Movement
Caliber RD108

Manual-winding Skeleton double flying tourbillon movement: manufactured in the Roger Dubuis workshop in Geneva. Re-engineered and improved performances with a power reserve of 72 hour, better resistance to magnetism thanks to tourbillon carriages made in titanium and cobalt-chrome. Two tourbillons linked with a differential directly connected to the second wheel of the gear train for a better transmission of the energy. Poinçon de Genève certified, one of the most demanding certifications in the world of Haute Horlogerie
Finishing: Shot-blasted, trued-up or circular-grained main plate and bridge with NAC coating
Functions: Hours, minutes
Frequency: 3 Hz / 21’600 Vibrations per Hour
Power reserve: 72 Hours
Diameter lines: 16 3/4
Thickness: 7.35 Millimeters
Number of pieces: 319
Number of rubies: 32

Case
Black ceramic case
Sapphire crystal with anti-reflective coating
Black titanium DLC open case back with sapphire crystal
Diameter: 45 Millimeters
Water resistance: 5 BAR (50m)

Dial
Grey double surface flange with engraved minute track and transferred texts, polished and Rhodium plated hour markers with SLN in the center

Hands
Grey double surface flange with engraved minute track and transferred texts, polished and Rhodium plated hour markers with SLN in the center

Strap
3D calf leather strap, interchangeable with Quick Release System – QRS

Buckle
Black DLC titanium cover, titanium blades, triple-folding, interchangeable with Quick Release System – QRS

Edition
Limited edition of 28 pieces

Certification
Geneva seal

Roger Dubuis Excalibur Knights of the Round Table Limited Edition DBEX0934

Roger Dubuis has launched a new timepiece from the iconic Knights of the Round Table collection. This new creation unites rare artistic mastery, outstanding craftsmanship and unbridled creativity.

This pink gold watch boasts the emblematic Knights of the Round Table dial design. Made of 18k 750/1000 pink gold, the twelve hour-markers are shaped after armed knights.

Roger Dubuis DBEX0934 Excalibur Knights of the Round Table Limited Edition

Dressed in medieval armour with plates, shield and helmet, each of these micro-sculptures has its own unique postures. The transparent blood-red flange and the magma inspired texture on the black dial are made of from precious Murano glass.

Roger Dubuis DBEX0934 Excalibur Knights of the Round Table Limited Edition

The 18K gold case incorporates signature details like notched bezel and three-legged strap attachments. The crown and its protector are intentionally shaped like the guard of a sword, designed to appear as if a blade is stuck inside the watch. The transparent sapphire crystal ring under the bezel provides the view of the knights.

Roger Dubuis DBEX0934 Excalibur Knights of the Round Table Limited Edition

The Roger Dubuis Knights of the Round Table is equipped with the automatic Monobalancier RD821 calibre. This movement maintains the excellentest standards of hand-finishing and haute-horlogerie artistry, according to the criteria of the Poinçon de Genève.

Visible through the exhibition case back, the oscillating weight of the movement spotlights a circular finish comprised of two woven layers of tilted pyramid shapes that create the appearance of castle-stained glass. Inspired by the triangular notches around the edge of the timepiece, this sophisticated design choice provides a fascinating view of the rotor moving inside the mosaic.

Roger Dubuis DBEX0934 Excalibur Knights of the Round Table Limited Edition

Secured with four screws, the pink gold case-back also features the engraving of the famous oath: “Around this table, the bravest knights will gather as equals. They will set forth in search of adventure, righting wrongs, protecting the weak and humbling the proud.”

This new Excalibur Knights of the Round Table watch comes with a black calf leather strap featuring a Quick Release System.

Roger Dubuis DBEX0934 Excalibur Knights of the Round Table Limited Edition

Limited to 28 pieces, this timepiece is available exclusively in Roger Dubuis boutiques.

Technical details

Movement
Cal. RD821, Mechanical, automatic-winding
Functions: Hour, minute
Number of components: 172
Number of jewels: 33
Frequency: 4 Hz (28’000 vph)
Power reserve: 48 hours
Diameter: 26.5 mm (11 ½)
Thickness: 3.4 mm
Finishing: Circular-grained main plate with Rhodium plating, circular-grained and Cotes de Genève

Dial
Crust made of black Murano glass
The magma in red vanish
The knights in pink gold (each knight is unique)
Flange made of Murano glass

Case
Excalibur case with design signature: notched bezel and three lugs
Diameter: 45 mm
Thickness: 15.15mm
Case material: Pink gold
Bezel: Pink gold and crystal sapphire
Crown: Pink gold and red Murano glass
Pink gold open case back with sapphire crystal bridge with Rhodium plating
Water resistance: 3 BAR (30 m)

Strap
Black 3D calf-leather strap
Interchangeable with Quick Release System
Pink gold cover with titanium blades, triple folding

Edition
Boutique exclusive
Limited edition of 28 pieces

ROGER DUBUIS Excalibur Gully Monotourbillon Limited Edition

Hyper luxury Swiss watch maker ROGER DUBUIS presents Excalibur Gully Monotourbillon, a special edition timepiece created in collaboration with French street artist Gully. A latest evolution of the Excalibur Original collection, this new wristwatch mixes both creative territories of the artist and the brand.

It is the second timepiece from the ROGER DUBUIS URBAN ART TRIBE project. The first model in this series was a special edition Excalibur watch created in partnership with tattoo artist Dr. Woo.

ROGER DUBUIS Excalibur Gully Monotourbillon Limited Edition

The star-shaped bridge is replaced by a skeleton dial representing the signature of the artist, using micro-structures filled with luminescent colored lacquer. Inspired by the spray paint used in urban art, ROGER DUBUIS filled the letters with luminescent coloured lacquer while the hour markers and the hands are filled with Super-Luminova.

ROGER DUBUIS Excalibur Gully Monotourbillon Limited Edition
Evoking his very first street works, Gully’s lettered tag uses the famed single-line technique. Starting from the centre of the timepiece, his hand moves in the direction of 11 o’clock, drawing the preliminary draft of a G. The line then heads towards 3 o’clock, but changes direction half-way to partially design a Y. Finally, the line reaches 9, then 12, 6 and 3, before it moves to the centre of the tourbillon and across to 4 o’clock.

ROGER DUBUIS Excalibur Gully Monotourbillon Limited Edition

Returning the line to the centre, it becomes clear that two L’s have been drawn. He concludes the run by drawing a U partially around the tourbillon. Look carefully at the letters born out of this continuous movement as the artist not only reinterprets the Roger Dubuis star but also signs the dial.

ROGER DUBUIS Excalibur Gully Monotourbillon Limited Edition

The RD512SQ mechanical manual-winding movement boasts an increased power reserve up to 72 hours thanks to tourbillon lower carriage made in titanium. The upper tourbillon carriage in cobalt is mirror-polished.

ROGER DUBUIS Excalibur Gully Monotourbillon Limited Edition

This new URBAN ART TRIBE timepiece from ROGER DUBUIS features a 42mm diameter Dark grey DLC titanium case. The Excalibur Gully Monotourbillon is mounted on a black calf leather strap, interchangeable with a Quick Release System for ultimate comfort and flexibility.

ROGER DUBUIS Excalibur Gully Monotourbillon Limited Edition

This boutique exclusive timepiece is limited to 8 pieces.

Technical details

Model: Excalibur Gully MT
Reference DBEX0931 – Excalibur Original
Boutique exclusive

Case
Type: Excalibur with design signature: notched bezel and three lugs
Diameter: 42 mm
Thickness: 12.7 mm
Case material: Dark grey DLC titanium
Bezel: Dark grey DLC titanium
Crown: Dark grey DLC titanium
Sapphire crystal glass
Case back: Dark grey DLC titanium open case back with sapphire crystal
Water resistance: 10 BAR (100 meters)

Movement
Calibre RD512SQ
Mechanical, manual-winding
Components: 194
Jewels: 19
Frequency: 3 Hz (21’600 vph)
Power reserve: 72 hours
Diameter: 37.1 mm (16 lines)
Thickness: 6.9 mm
Finishes: Shot-blasted and trued-up main plate and bridges with NAC coating

Functions
Hour, minute

Dial
Grey double surface flange with engraved minute track and transferred texts, polished and rhodium plated hour markers with SLN in the centre
Gully signature in skeleton micro-structures filled with luminescent colored lacquer
Triple surface hands in white gold with satin brushed finish on the tilted surfaces and shot blasted finish on the flat grey surface, SLN tips

Strap
Black 3D calf leather strap, interchangeable with Quick Release System
Buckle: Dark grey DLC titanium cover with titanium blades triple folding interchangeable with Quick Release System

Roger Dubuis Excalibur Dr. Woo MT Limited Edition

Swiss luxury watch brand Roger Dubuis has introduced a special edition Excalibur watch in partnership with tattoo artist Dr. Woo. This boutique exclusive creation is limited to eight pieces.

Roger Dubuis Excalibur Dr. Woo MT Limited Edition

Mixing both creative territories of the artist and the Swiss hyper brand, this new timepiece is the new development of the Excalibur Original collection. The star-shaped bridge is replaced by a specific sapphire dial on each piece that displays a star ship journey’s graphic design by Dr. Woo, revealing his spider symbol on 8 different places.

Roger Dubuis Excalibur Dr. Woo MT Limited Edition

A second dial in the back display a cosmic map as Dr Woo’s vision of time. The watch houses a calibre with improved performances: increased power reserve up to 72 hours thanks to tourbillon lower carriage made in titanium. Upper tourbillon carriage in cobalt chrome for better finishing: mirror polish. Both titanium and cobalt chrome are anti-magnetic.

Roger Dubuis Excalibur Dr. Woo MT Limited Edition
The skeleton calibres manufactured by Roger Dubuis in Geneva are the essence of the expressive singularity of the Excalibur collection. Complying with the prestigious Poinçon de Genève certification, the Excalibur watches are designed like contemporary works of art. Every single component of this timepiece is finished by hand.

Roger Dubuis Excalibur Dr. Woo MT Limited Edition

The case of the watch is made of EON GOLD, patented type of pink gold alloy which will tarnish less than standard pink gold and more resistant to challenging conditions such as salt water.

Technical details

Model: Excalibur Dr. Woo MT

Case
Type: Excalibur with design signature: notched bezel and three lugs
Diameter: 42 mm
Thickness: 12.7 mm
Case, crown, case back and bezel made of EON GOLD
Sapphire crystal with anti-reflective coating
Water resistance: 10 BAR (100 m)

Movement
RD512SQ
Mechanical, manual-winding movement
Functions: Hour, minute
Number of components: 194
Jewels: 19
Frequency: 3 Hz (21’600 vph)
Power reserve: 72 hours
Diameter: 37.1 mm
Thickness: 6.9 mm
Finishing: Shot-blasted and trued-up main plate and bridges with NAC coating

Dial
Grey double surface flange with engraved minute track and transferred texts, polished and pink gold plated hour markers with SLN in the center. Dr. Woo’s graphic design laser-engraved on a sapphire crystal disc and second engraved pink gold dial inside the back.
Hands: Triple surface hands in pink gold with satin brushed finish on the tilted surfaces and shot-blasted finish on the flat grey surface, SLN tips

Strap
Black 3D calf leather strap engraved with Dr Woo’s langage symbols representing connexion between humans, interchangeable with Quick Release System – QRS
Clasp: Pink gold cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Edition
Boutique exclusive
Limited edition of 8 pieces

Roger Dubuis Excalibur Spider Huracàn Automatic Monobalancier (MB) Limited Edition

Swiss luxury watch brand Roger Dubuis presents Excalibur Spider Huracàn Automatic, a limited edition specifically developed for the launch of the Lamborghini Huracán Super Trofeo EVO2, the super car involved in the Super Trofeo GT races.

This automatic timepiece features a 45mm diameter case made of SMC carbon, a composite material developed in-house and similar to the one used on the Lamborghini Huracán’s monocoque chassis and body panels, while black DLC titanium is used on the bezel.

Roger Dubuis Excalibur Spider Huracàn Automatic Monobalancier (MB) Limited Edition

With a honeycomb motif made famous by the Huracán supercar, the hexagonal dashboard of the Lamborghini Huracán is reflected in the design, while twin barrels and a 12° tilted balance wheel represent the signature calibre associated with Lamborghini Squadra Corse. Visible through the sapphire crystal caseback, the semi-skeletonised movement reveals a Huracán wheel rim inspired 360° oscillating weight.

Roger Dubuis Excalibur Spider Huracàn Automatic Monobalancier (MB) Limited Edition

Dressed in a distinctive khaki green and electrifying orange, this sharp and super-sleek timepiece boasts a Black DLC titanium crown inspired by the Huracán’s racing nuts. The upper calibre strut-bar bridge is reminiscent of those found on the V10 engine itself.

Roger Dubuis Excalibur Spider Huracàn Automatic Monobalancier (MB) Limited Edition

The innovative strap made from a combination of rubber and Alcantara® ensures ultimate comfort and flexibility. The inner lining also features the unique Pirelli P ZeroTM Trofeo R pattern, just like the pattern found on the tyres that tear up the track. Finally, a Quick Release System on the buckle and strap guarantees the wearer can change it quickly.

The Excalibur Spider Huracán MB is limited to just 88 pieces.

Technical details

Case
Carbon case with black DLC titanium bezel
Excalibur skeleton concept with design signature: notched bezel and three lugs
Diameter: 45 mm
Thickness: 14.1 mm
Case material: SMC carbon
Bezel: Black DLC titanium with lacquer markings
Crown: Black DLC titanium crown with lacquer ring
Glass: Sapphire crystal with anti-reflective coating
Case back: Black DLC titanium open case back with sapphire crystal with Huracàn logo metallized
Water resistance: 5 BAR (50 m)

Movement
Calibre RD630
Mechanical, automatic-winding
Hour, minute, second, date
Total components: 233
Jewels: 29
Frequency: 4 Hz (28’000 vph)
Power reserve: 60 hours
Diameter: 37.1 mm (16 lignes)
Thickness: 7.7 mm
Finishing: Shot-blasted and NAC coated main plate. Shot-blasted and trued-up and NAC coated bridges
12° tilted balance
Twin barrel
Rotor designed like a wheel rim

Dial
Varnished lower flange with transferred texts and minute track
Black PVD coated upper flange with polished and
Rhodium plated hour markers filled with SLN in the centre
Rubber with Alcantara® inlay
Pirelli P Zero Trofeo R pattern on the lining of the strap
Interchangeable with Quick Release System – QRS

Hands
White gold hour and minute hands coated with black PVD
Orange outlined tips filled with SLN
Orange varnished second hand

Strap and buckle
Interchangeable strap with QRS – Quick Release System
Rubber and Alcantara® strap
Black DLC titanium cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Edition
Limited edition of 88 pieces

Roger Dubuis Excalibur Spider Huracàn “Frosty White” Automatic Limited Edition

Limited to just 88 pieces, the new Excalibur Spider Huracán is the latest creation to emerge from Roger Dubuis x Lamborghini Squadra Corse, a partnership defined by radical performance and razor-sharp aesthetics. Made of Ceramic Composite Fibre (CCF), this racing car inspired type has a striking frosty white case.

Roger Dubuis Excalibur Spider Huracàn “Frosty White” Automatic Limited Edition

Equipped with an automatic RD630 calibre, the 45-mm diameter Excalibur Spider Huracán channels the same exhilarating blend of performance and lightness as its motoring namesake.

Roger Dubuis Excalibur Spider Huracàn “Frosty White” Automatic Limited Edition

Taking strong visual cues from which the Lamborghini Huracán is based, the timepiece is imbued with signature racing design codes. With a honeycomb motif made famous by the supercar, the hexagonal dashboard of the Lamborghini Huracán is reflected in the timepiece, the same epicentre paralleled in the shape of the calibre.

Roger Dubuis Excalibur Spider Huracàn “Frosty White” Automatic Limited Edition

Its twin barrels and a 12° tilted balance wheel represent the movement signature associated with Lamborghini Squadra Corse. When viewed from the back, the semi-skeletonised movement reveals the 360° oscillating rim weight, which evokes a Huracán wheel rim. This movement provides a power reserve of 60 hours.

Roger Dubuis Excalibur Spider Huracàn “Frosty White” Automatic Limited Edition

The titanium crown is inspired by the supercar’s racing nuts. It is paired with an upper calibre strut-bar design bridge reminiscent of those found on the Lamborghini Huracán V10 engine itself. A cryptical date feature enhances its playful allure, while a Quick Release System on the buckle and strap ensures the watch is easily interchangeable.

CCF (Ceramic Composite Fiber) is a high-tech material exclusive to Roger Dubuis. The Geneva manufacture developed this material offering a significant gain in weight with CCF being 20% lighter than carbon. Ceramic fibers are used in aerospace in the production of space rockets.

Roger Dubuis Excalibur Spider Huracàn “Frosty White” Automatic Limited Edition

Both the upper flange and hands of the timepiece are filled with Super-Luminova™. The strap of the watch is made of luminescent rubber. Using a manufacturing process known as SuperBiwiNova®, the rubber is vulcanized with SLN. Luminescent material – SLN – is also applied on the bezel and the strut bars. Thanks to these innovative luminscent applications, the Excalibur Spider Huracán offers a stunning visual treat by night.

SuperBiwiNova® is a technology developed by Switzerland based company BIWI SA.

Technical details

Model: Roger Dubuis Excalibur Spider Huracàn “Frosty White”

Case
Type: Excalibur skeleton concept with design signature: notched bezel and three lugs
Diameter: 45 mm
Thickness: 14.1 mm
Case material: Ceramic Composite Fiber – CCF
Bezel: Ceramic Composite Fiber – CCF – with luminescent decor
Crown: Titanium crown with white lacquer ring
Sapphire crystal with anti-reflective coating
Titanium open case back with sapphire crystal with Huracàn logo metallized
Water resistance: 5 BAR (50 m)

Movement
Calibre RD630
Mechanical, automatic-winding movement
Number of components: 233
Jewels: 29
Frequency: 4 Hz (28’000 vph)
Power reserve: 60 hours
Diameter: 37.1 mm (16 lines)
Thickness: 7.7 mm
Decoration: Shot-blasted and NAC coated main plate. Shot-blasted and trued-up and NAC coated bridges

Functions
Hour, minute, second, date

Dial
White varnished lower flange with transferred texts and minute track. Rhodium plated upper flange with polished and
Rhodium plated hour markers filled with SLN in the centre

Hands
White gold hour and minute hands
Black outlined tips filled with SLN. Black varnished second hand

Strap
White rubber with white luminescent rubber inlay
Pirelli Cinturato pattern on the lining of the strap
Interchangeable with Quick Release System – QRS
Titanium cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Edition
Boutique exclusive
Limited edition of 88 pieces

Roger Dubuis New Excalibur Spider Pirelli

Swiss luxury watch maker Roger Dubuis presents the new Excalibur Spider Pirelli, the brand’s first fully versatile timepiece fuelled by adrenaline and crafted with winning motorsport tyre rubber.

Manufactured in collaboration with Pirelli, the Excalibur Spider Pirelli watch can be customized quickly thanks to interchangeable components and an innovative quick release system. It is supplied with interchangeable straps that features rubber inlays from certified race winning Pirelli tyres.

Roger Dubuis New Excalibur Spider Pirelli

Inspired by the renowned motorsport Pit Stop, each element of the new Excalibur Spider Pirelli is interchangeable, from strap to crown and bezel – all with a simple click. Not only is this an extremely customisable timepiece, it also features innovative lock technology.

Roger Dubuis New Excalibur Spider Pirelli

With an uncompromising focus on a clicking sensation and sound both reassuring and thrilling, the Quick Release System on the strap and crown is now taken to the next level at the bezel, with a precise position alignment that fixes the clock with one click.

Roger Dubuis New Excalibur Spider Pirelli automatic watch

The Excalibur Spider Pirelli is equipped with Roger Dubuis’ first automatic skeleton movement. Each and every component of this movement is carefully finished by hand at the Roger Dubuis Manufacture in Geneva.

Roger Dubuis New Excalibur Spider Pirelli watch with red bezel

This extremely beautiful incorporates a star-shaped bridge. It also features a micro-rotor, which is visible at 11 o’clock. Certified by the Poinçon de Genève, this avant-garde hyper luxury watch is made of innovative materials, such as DLC Titanium, both lighter and more luxurious than stainless steel. It has 60-hour power reserve.

Roger Dubuis New Excalibur Spider Pirelli watch with black DLC titanium case

Dressed in a black DLC titanium case with titanium container and rubber inlays, the Excalibur Spider Pirelli watch measures 45mm diameter and has a water resistance up to 50 meters.

Roger Dubuis New Excalibur Spider Pirelli watch case back view

With three additional kits in red, white or blue – the iconic Pirelli colour codes – the Excalibur Spider Pirelli transforms from full black to a pop of bold colour in a click. Available in a limited run of just 88 kits per colourway, these are timepieces crafted from race-winning tyres.

Roger Dubuis New Excalibur Spider Pirelli watch interchangeable bezel

Filled with racing design codes, the inner design of the strap displays the recognisable Pirelli CinturatoTM Intermediate pattern and the additional colour kits are thicker than the base bezel to mirror the look and feel of the distinctive Pirelli tyres.

Roger Dubuis New Excalibur Spider Pirelli

Technical details

Model: Excalibur Spider Pirelli

Case
Black DLC titanium case with titanium container and rubber inlays
Black DLC titanium bezel with sapphire crystal and anti-reflective coating, interchangeable with QRS – Quick Release System
Black DLC titanium open case back with sapphire crystal and metallized Pirelli logo
Rubber crown with black DLC titanium cover, interchangeable with QRS – Quick Release System
Water resistance: 5 BAR (50m)

Movement
TYPE: Automatic, self-winding / Skeleton
CALIBER: A skeleton calibre with a star-shaped bridge: the signature of the Excalibur Original collection
Powered by a micro-rotor, the mechanism is manufactured in Geneva
The calibre is certified by the Poinçon de Genève, one of the most demanding certification in the world of Haute Horlogerie
Number of Pieces: 166
Frequency: 4 Hz / 28’800 Vibrations per Hour
Power reserve: 60 Hours

Functions
Hours, minutes

Dial
Black lower flange with transferred texts and minute track
Black upper flange with polished and Rhodium plated screw-like hour markers filled with SLN in the centre

Strap
Rubber strap with winning tire rubber inlay, Pirelli Cintturato pattern on the lining, interchangeable with Quick Release System – QRS
Black DLC titanium cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Roger Dubuis Excalibur Glow Me Up

This extraordinary Roger Dubuis Single Flying Tourbillon version is the first timepiece to feature luminescent diamonds at night in different hues. The latter is possible thanks to a patented process which is to add luminescent material underneath the diamonds, in the grooves that are holding the stones into place.

Roger Dubuis Excalibur Glow Me Up

In addition to that, another patented process allows the timepiece to have the calibre glow. The chamfers of the calibre are painted with luminescent material enhancing the iconic star-shaped bridge by night.

Roger Dubuis Excalibur Glow Me Up

The Excalibur Glow Me Up houses the new RD512SQ calibre, a reengineered mechanical flying tourbillon movement with improved power reserve up to 72 hours and increased durability thanks to a new lube.

Roger Dubuis Excalibur Glow Me Up

The skeleton calibres manufactured by Roger Dubuis in Geneva are the essence of the expressive singularity of the Excalibur collection. Complying with the prestigious Poinçon de Genève certification, Roger Dubuis Excalibur watches are designed like contemporary works of art. Every single component being finished by hand, the watches are symbols of passion.

Roger Dubuis Excalibur Glow Me Up

The case is made of EON GOLD, a non-tarnishing alloy of pink gold. Showcasing the Maison’s obsession with art, light and luminescence, the Excalibur Glow Me Up is limited to just eight timepieces.

Roger Dubuis Excalibur Glow Me Up

Technical details

Model: Roger Dubuis Excalibur Glow Me Up
Reference DBEX0963

Edition
Boutique exclusive
Limited edition of 8 pieces

Case
Excalibur with design signature: notched bezel and three lugs
Diameter: 42 mm
Thickness: 12.7 mm
Case material: EON GOLD
Bezel: EON GOLD set with baguette diamonds
Crown: EON GOLD
Glass: Sapphire crystal with anti-reflective treatment
Case back: EON GOLD with smoked sapphire crystal
Water resistance: 10 BAR (100 m)

Movement
Calibre RD512SQ
Mechanical, manual-winding movement
Functions: Hour, minute
Number of parts: 194
Jewels: 19
Frequency: 3 Hz (21’600 vph)
Power reserve: 72 hours
Diameter: 37.1 mm (16 lines)
Thickness: 6.9 mm
Finishes: Circular-grained main plate and bridges with NAC or pink gold coating

Dial
Pink gold coated double surface flange with engraved minute track and transferred texts, polished and pink gold coated hour markers with SLN in the center
Hands: Triple surface hands in pink gold with satin brushed finish on the tilted surfaces and shot-blasted finish on the flat white surface, SLN tips

Strap
Black 3D calf leather strap, interchangeable with Quick Release System – QRS
Pink gold cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Roger Dubuis Excalibur Single Flying Tourbillon

Swiss luxury watch maker Roger Dubuis presents Excalibur Single Flying Tourbillon, the most recent interpretation of their hyper horology creations. Enhanced with meticulous care, this new timepiece is reinterpreted with sophistication and flair using modern and technical materials.

Roger Dubuis Excalibur Single Flying Tourbillon

The new design showcases clean cut lines on both case and movement. The new RD512SQ calibre creates the impression of a thinner look and feel, while heightening the sense of transparency and depth. The Roger Dubuis star now levitates freely above the barrel.

Roger Dubuis Excalibur Single Flying Tourbillon

A strong visual identity is created with a signature two-line pattern – seen between the notch on the crown and bezel, the star’s arms, the tourbillon’s cage, the hour’s marking on the flange, the hands – all of which cleverly appear as though they will meet but never do.

Roger Dubuis Excalibur Single Flying Tourbillon

Certified by Poinçon de Genève, this fine watchmaking movement features decorations such as circular-brushed top surfaces and polished angles that demonstrate Roger Dubuis’ imaginative approach. Each component of the movement is manually finished in-house.

Roger Dubuis Excalibur Single Flying Tourbillon

The new RD512SQ calibre comes with a titanium lower tourbillon cage – twice lighter than stainless steel – and a mirror-polished Cobalt Chrome upper tourbillon cage, the weight of the piece is reduced to optimum effect. This allows the power reserve to be radically optimised to 72 hours. The non-magnetic material used inside the tourbillon improves chronometric performance.

Roger Dubuis Excalibur Single Flying Tourbillon

To facilitate a comfortable experience around the wrists, the brand now offers a range of entirely new strap sizes. With 5 sizes from 0 to 4, finding the perfect strap ensures the buckle is always centred on the wrist, as a Quick Release System offers ultimate flexibility.

Roger Dubuis Excalibur Single Flying Tourbillon

The 42mm case is only available in eighty-eight pieces per colourway: Dark Grey DLC Titanium, Cobalt Chrome CarTech Micro-Melt BioDur CCMTM and the new EON GOLD, a pink gold shade that remains more stable thanks to non-tarnish technology.

Roger Dubuis Excalibur Single Flying Tourbillon

Technical details

Model: Excalibur Single Flying Tourbillon

Movement
RD512SQ Calibre
Skeleton single flying tourbillon
Decorations: Shot-blasted and trued-up main plate and bridges with NAC coating
Number of parts: 194 components
Jewels: 19
Diameter: 37.1 mm
Thickness: 6.9 mm
Frequency: 2 x 3 Hz (21’600 vph)
Power-reserve: 72 hours
Poinçon de Genève certified

Functions
Hours, Minutes, single flying tourbillon at 7 o’clock

References

Reference RDDBEX0838

Roger Dubuis Excalibur Single Flying Tourbillon Reference RDDBEX0838

Case
Diameter: Ø42 mm
White gold case, bezel and crown, CarTech Micro-Melt BioDur CCMTM (® in the USA) case back with sapphire crystal
Thickness: 12.7 mm
Water resistance: 10 BAR (100 m)

Dial
Blue CVD coated double surface flange with engraved minute track and transferred texts, polished and Rhodium plated hour markers with SLN in the center
Hands: Triple surface hands in white gold with satin brushed finish on the tilted surfaces and shot-blasted finish on the flat white surface,
SLN tips

Strap
Blue 3D calf leather strap, interchangeable with Quick Release System
Buckle: Titanium cover with titanium blades, triple folding

Production
88 pieces

Certification
Poinçon de Genève

Reference RDDBEX0889

 Roger Dubuis Excalibur Single Flying Tourbillon Reference RDDBEX0889

Case
Diameter: Ø42 mm
Dark grey DLC Titanium case, bezel and crown, dark grey DLC Titanium case back with sapphire crystal
Thickness: 12.7 mm
Water resistance: 10 BAR (100 m)

Dial
Grey double surface flange with engraved minute track and transferred texts, polished and Rhodium plated hour markers with SLN in the center
Hands: Triple surface hands in white gold with satin brushed finish on the tilted surfaces and shot-blasted finish on the flat grey surface, SLN tips

Strap
Black 3D calf leather strap, interchangeable with Quick Release System
Buckle: Dark grey DLC Titanium cover with titanium blades, triple folding. Easily interchangeable

Production
88 pieces

Certification
Poinçon de Genève

Reference RDDBEX0836

Roger Dubuis Excalibur Single Flying Tourbillon Reference RDDBEX0836

Case
Size: 42mm
Material: Eon Gold
Caseback with sapphire crystal
Water resistance: 10BAR (100 m)

Dial
Grey double surface flange with engraved minute track and transferred texts, polished and pink gold plated hour markers with SLN in the center

Strap
Black 3D calf leather strap, interchangeable with Quick Release System – QRS
Clasp: EON gold cover with Titanium blades, triple folding, interchangeable with Quick Release System – QRS

Production
88 pieces

Certification
Poinçon de Genève

Roger Dubuis Excalibur Diabolus in Machina (New Models in Pink Gold and DLC-coated Titanium)

Roger Dubuis presents two new editions of its high complication watch, the Excalibur Diabolus in Machina. Now available in pink gold and DLC-coated titanium, this hyper horology creation incorporates a minute repeater, alongside the Geneva Maison’s signature flying tourbillon, as well as a double micro-rotor automatic system.

Its minute repeater chimes the tritone, the “Diabolus in Musica” chord outlawed in medieval religious music. The Excalibur Diabolus in Machina also features two other functions: a tone playback disc indicator and an “all or nothing” safety device.

The Excalibur Diabolus in Machina was introduced in 2020. The inaugural model features CarTech Micro-Melt BioDur CCMTM case. Roger Dubuis Excalibur Diabolus in Machina

The Excalibur Diabolus in Machina has a push-piece for activating a chime. The information on each cam is mechanically read off by the Minute Repeater’s main feeler-spindle system, which passes it on to the racks enabling the hammers to strike the gongs. The latter sounds a low pitch for the hours, a high pitch for the minutes, and two tones for the quarter hours, allowing the wearer to check the time at will. Consisting of three tones, or six semitones, the tritone – also known as the triad or the flatted fifth – an unsettling interval that does not conform to listeners’ expectations.

Roger Dubuis Excalibur Diabolus in Machina

This distinctive dissonance was referred to in medieval times as “the devil’s chord” or diabolus in musica and strictly prohibited in religious compositions. It has nonetheless continued to play a crucial role in complex melodic harmony, notably appearing in Camille Saint-Saëns’ symphonic poem Danse Macabre and in the signature tune of the Black Sabbath metal band.

Cleverly shaking up the world of minute repeaters, Roger Dubuis has chosen the sound of the tritone as the chime of its Minute Repeater in the Diabolus in Machina. Pressing the minute repeater button between 9 and 10 o’clock activates the dissonant tonality – tuned to C and G flat – resounding through noble materials and providing a fascinating listening experience.

Roger Dubuis Excalibur Diabolus in Machina

Various key technical advances featured in the Excalibur Diabolus in Machina include the Tone Playback Disc Indicator at 11 o’clock. Activating the Minute Repeater sets off the rotation of this disc – merged with a Roman numeral and bearing the words Hours, Quarters and Minutes. The result is a visually striking depiction of the time intervals being chimed.

An additional functional indicator further simplifies usage by showing whether the watch is in “manual winding” or “time setting” position. As well as enhancing the design through its artful integration at 4 o’clock, it plays a useful safety role in avoiding potential damage by warning the wearer not to adjust the watch while the Minute Repeater is chiming.

Roger Dubuis Excalibur Diabolus in Machina

The “all or nothing” mechanism offers additional security by ensuring the minute repeater can be activated only once the pusher has been pressed all the way in. This eliminates the risk of harming the mechanism by inadvertent triggering, as well as facilitating comprehension of the chime by avoiding any partial and potentially confusing indications of time.

Roger Dubuis RD0107 Calibre
RD0107 Calibre, Pink Gold Version

The intricate complexities of this model are naturally heightened by Roger Dubuis’ typically bold decision to combine this fresh approach to the minute repeater with its signature flying tourbillon. Each of these two horological complications involves its own technical challenges and associating them within the same model is the kind of endeavour reserved for the most skilled and experienced master-watchmakers.

Roger Dubuis RD0107 Calibre
RD0107 Calibre, Black DLC Titanium Version

This Hallmark of Geneva-certified series powered by Calibre RD 107 is housed in an imposing 45 mm pink gold or DLC titanium-coated case and fitted with a calf leather strap designed for maximum comfort.

Technical details

Model: Excalibur Diabolus in Machina, RDDBEX0840

Roger Dubuis Excalibur Diabolus in Machina pink gold

Case
Skeletonized, Ø45 mm, case, bezel and crown in pink gold
Case back in pink gold with sapphire crystal and anti-reflective treatment
Thickness: 16.8 mm
Water resistance: 5 BAR (50 m)

Dial
Grey double surface flange with engraved minute track, transfered texts
Polished and pink gold plated hour markers filled with SLN in the center

Movement
RD0107 Calibre: Mechanical automatic with minute repeater and single flying tourbillon
Features: Minute repeater and single flying tourbillon
Decorations: circular-grained or trued-up or shot-blasted or Cotes de Genève and NAC coated bridges and plate
Number of parts: 558 components
Jewels: 54 rubis
Diameter: 14 ¾’’’
Thickness: 10 mm
Frequency: 3 Hz (21’600 vph)
Power-reserve: 72 hours

Functions
Hours, Minutes, Minute repeater, function indicator, chiming indicator

Strap
Interchangeable 3D calf leather strap
Buckle: Interchangeable titanium cover with titanium triple folding buckle

Production
Unique series 1 of 1

Model: Excalibur Diabolus in Machina, RDDBEX0841

Roger Dubuis Excalibur Diabolus in Machina black dlc titanium

Case
Skeletonized, Ø45 mm, case, bezel and crown in black DLC Titanium
Case back in black DLC titanium with sapphire crystal and anti-reflective treatment
Thickness: 16.8 mm
Water resistance: 5 BAR (50 m)

Dial
Black double surface flange with engraved minute track, transfered texts
Polished and rhodium plated hour markers filled with SLN in the center

Movement
RD0107 Calibre: Mechanical automatic with minute repeater and single flying tourbillon
Features: Minute repeater and single flying tourbillon
Decorations: circular-grained or trued-up or shot-blasted or Cotes de Genève and NAC coated bridges and plate
Number of parts: 558 components
Jewels: 54 rubis
Diameter: 14 ¾’’’
Thickness: 10 mm
Frequency: 3 Hz (21’600 vph)
Power-reserve: 72 hours

Functions
Hours, Minutes, Minute repeater, function indicator, chiming indicator

Strap
Interchangeable 3D calf leather strap
Buckle: Interchangeable black DLC titanium cover, titanium blades, triple folding buckle

Production
Unique series 1 of 1

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

Made of Damascus titanium, the latest interpretation of the iconic Knights of the Round Table collection from Roger Dubuis offers a stunning combination of contemporary craftsmanship and technical savoir-faire.

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

Powered by Calibre RD821 and fitted with a vintage grey red-stitched calf leather strap, the new Excalibur Knights of the Round Table collection is a daring demonstration of the Maison’s exceptional expertise, passion for challenges and obsession with reinventing iconic legends. It sets an incredible stage for the fabled knights micro-sculpted by hand, while reinventing the ancient art of Damascus steel through a Damascus titanium alloy worked in a technically and aesthetically innovative manner.

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

Twice as light as steel yet 30% more resistant, this material is totally biocompatible. Starting from a block of Damascus titanium, the case and bezel are machined and then dipped in an acid bath designed to reveal the inimitable pattern. This exclusive treatment, combined with the Haute Horlogerie decorative techniques applied to the 45 mm case of this model, represents a novel approach for Roger Dubuis.

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

So as to preserve the singular allure of the raised Damascus motif, the Maison’s watchmakers opted for a variety of refined techniques.

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

Well-accustomed to performing movement decorations meeting the rigorous Hallmark of Geneva criteria, they opted to implement them here on the watch exterior.

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

These subtle finishing touches notably include delicate straight-graining creating an appealing matt finish on the case sides; brushing that enhances the smooth look and touch of the curving lugs; as well as extremely precise hand-chamfering using a variety of files. The result is a series of straight and flat angles such as no machine could ever hope to achieve.

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

Its 3D dial features an outstanding display of craftsmanship skills including a stunning combination of dark grey enamel, white gold and Murano glass. The dial structure is composed of white gold and dark grey enamel, creating the perfect stage-setting for the crafted Knights of the Round Table. Cast in pink gold and just 7mm high, each knight is meticulously micro-sculpted, engraved and finished by hand. They represent striking examples of Low Poly Art, a singular technique in which polygonal facets are used to create sculptures or painting.

Roger Dubuis Excalibur Knights of the Round Table Damascus Titanium Limited Edition

Each sword represents an hour. The case-back is engraved with their famous oath of allegiance to King Arthur: “Around this table, the bravest knights will gather as equals. They will set forth in search of adventure, righting wrongs, protecting the weak and humbling the proud”.

Technical details

Model: Excalibur Knights of the Round Table Damascus titanium
Reference: RDDBEX0806

Case
Ø45 mm
Damascus titanium case, bezel, crown and case back
Glass in sapphire crystal
Thickness: 14.6mm
Water resistance: 5 BAR (50 m)

Dial
3D dial with white gold and dark grey enamel blocks and red Murano glass
LowPoly knights hand-sculpted in 18K pink gold

Movement
Calibre RD821 caliber, automatic self-winding, engraved 22K pink gold oscillating weight
Poinçon de Genève certified
Decorations: Rhodium-plated plate and bridges with circular “Côtes de Genève”and circular graining decorations
Number of parts: 172 components
Jewels: 33
Diameter: 12 1/2
Thickness: 3.43mm
Frequency: 4 Hz (28’800 vph)
Power-reserve: 48 hours

Functions
Hours, Minutes

Strap
Vintage grey calf strap with red stitching
Buckle: Stainless steel, double folding buckle

Production
Limited to 28 pieces

Certification
Poinçon de Genève

Roger Dubuis Excalibur Spider and Excalibur Spider Pirelli

Roger Dubuis celebrates its partnership with Pirelli through the release of an exciting new interpretation of its iconic Excalibur collection, the Excalibur Spider and Excalibur Spider Pirelli.

Roger Dubuis Excalibur Spider and Excalibur Spider Pirelli

An in-house calibre featuring the Manufacture’s signature skeleton flying tourbillon, reduced to its essence to be fitted into a 39mm case. Equipped with a 60 hours power reserve, this impressive feat of mechanical engineering is accentuated by Hallmark of Geneva decorations.

Roger Dubuis Excalibur Spider and Excalibur Spider Pirelli

Whether in pink gold with white accents, titanium total black or sporty red and black, all three versions are equipped with Roger Dubuis’ ingenious quick-release system and interchangeable straps. This enables the Maison’s exclusive tribe to enjoy the freedom of swapping looks quickly and easily. A versatile model whose diameter as well as different strap sizes make it a perfect fit for both men’s and women’s wrists.

Roger Dubuis Excalibur Spider and Excalibur Spider Pirelli

Each model comes with a different inlay: the one matching the red Pirelli iteration is made from winning motorsport tyre rubber having competed in real races, while the black version sports Rubber Tech and the white glows in calf leather.

Roger Dubuis Excalibur Spider and Excalibur Spider Pirelli

All are fitted with exclusive straps featuring the legendary profile of a Pirelli CinturatoTM intermediate tyre on the inside.

They are available as limited editions of just 88 each for the black or white Excalibur Spider models; and 28 for the Excalibur Spider Pirelli.

Roger Dubuis Excalibur Spider and Excalibur Spider Pirelli

Technical details

Model: Roger Dubuis Excalibur Spider RDDBEX0816

Roger Dubuis Excalibur Spider RDDBEX0816

Case
Skeletonized, Ø39 mm, Pink gold case with rubber inlays, pink gold bezel with white lacquer markings, pink gold crown, pink gold case back with sapphire crystal
Thickness: 13.3mm
Water resistance: 10 BAR (100 m)

Dial
Pink gold plated lower flange with transfered texts and minute track. White ceramic upper flange with diamond set hour markers

Strap
Rubber strap with calf leather inlay, Pirelli Cinturato™ pattern on the inside, interchangeable with Quick Release System – QRS
Buckle: Pink gold cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Movement
RD510SQ Calibre: Mechanical, manual-winding with single flying tourbillon
Features: single flying tourbillon
Functions: Hours, Minutes, Flying tourbillon at 7 o’clock
Decorations: Circular-grained main plate and bridges with pink gold coating, white lacquered inner star-bridge décor
Number of parts: 179 components
Jewels: 17
Diameter: 13 ½
Thickness: 5.13mm
Frequency: 3 Hz (21’600 vph)
Power-reserve: 60 hours

Production
Limited to 88 pieces

Model: Roger Dubuis Excalibur Spider RDDBEX0815

Roger Dubuis Excalibur Spider RDDBEX0815

Case
Skeletonized, Ø39 mm, Black DLC titanium case with rubber inlays, titanium with lacquered markings bezel, black DLC titanium overmolded with rubber crown, titanium case back with sapphire crystal
Thickness: 13.3mm
Water resistance: 10 BAR (100 m)

Dial
Black lower flange with transferred texts and minute track
Black upper flange with Rhodium plated hour markers filled with SLN

Strap
Rubber strap with Rubber Tech inlay, Pirelli Cinturato™ pattern on the inside, interchangeable with Quick Release
System – QRS
Buckle: black DLC titanium cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS
Calibre: RD510SQ caliber, single flying tourbillon

Movement
RD510SQ Calibre: Mechanical, manual-winding with single flying tourbillon
Features: single flying tourbillon
Functions: Hours, Minutes, Flying tourbillon at 7 o’clock
Decorations: Circular-grained main plate and bridges with NAC coating, grill décor with hexagonal pattern between the main plate and the bridges, Rhodium plated inner star-bridge decor
Number of parts: 179 components
Jewels: 17
Diameter: 13 ½
Thickness: 5.13mm
Frequency: 3 Hz (21’600 vph)
Power-reserve: 60 hours

Production
Limited to 88 pieces

Model: Roger Dubuis Excalibur Spider Pirelli RDDBEX0817

Roger Dubuis Excalibur Spider Pirelli RDDBEX0817

Case
Skeletonized, Ø39 mm, Black DLC titanium case with rubber inlays, Black DLC titanium bezel, black DLC titanium overmolded with rubber crown, black DLC titanium case back with sapphire crystal and metallized Pirelli logo
Thickness: 13.3mm

Dial
Red lower flange with transferred texts and minute track
Black upper flange with Rhodium plated hour markers filled with SLN
Water resistance: 10 BAR (100 m)

Strap
Rubber strap with winning tire rubber inlay, Pirelli
Cinturato™ pattern on the inside, interchangeable with Quick Release System – QRS
Buckle: Black DLC titanium cover with titanium blades, triple folding, interchangeable with Quick Release System – QRS

Movement
RD510SQ Calibre: Mechanical, manual-winding with single flying tourbillon
Features: single flying tourbillon
Functions: Hours, Minutes, Flying tourbillon at 7 o’clock
Decorations: Circular-grained main plate and bridges with NAC coating, grill décor with hexagonal pattern between the main plate and the bridges, red lacquered inner star-bridge decor
Number of parts: 179 components
Jewels: 17
Diameter: 13 ½
Thickness: 5.13mm
Frequency: 3 Hz (21’600 vph)
Power-reserve: 60 hours

Production
Limited to 28 pieces, boutique exclusive

Roger Dubuis – Excalibur Feng and Excalibur Long

To celebrate the new Chinese year, Roger Dubuis has created two special editions of its Excalibur Double Flying Tourbillon watch. These two exciting new timepieces reinterpret powerful symbols through unmatched craftsmanship: Excalibur Long, representing the majestic Dragon and Excalibur Feng, embodying the gracious Phoenix.

Roger Dubuis - Excalibur Feng and Excalibur Long

First in the world to introduce a double flying tourbillon, this contemporary architectural caliber is the extreme expression of the brand’s passion for recreating the codes of hyper horology.  Above and beyond its hypnotic aesthetic appeal, this calibre ensures an enhanced precision thanks to its differential system serving to average out the rate of the two tourbillons.

Roger Dubuis - Excalibur Feng and Excalibur Long

Brought to life in a 45mm masterpiece, the iconic Excalibur Double Flying Tourbillon is this time interpreted with an unbridled artistic creativity where 18K rose gold reigns supreme. With its head placed at 12 o’clock and its body and limbs intertwining with mechanical parts of the dial, the majestic dragon seems to be playing with this grand complication in a very daring way.

Roger Dubuis - Excalibur Feng and Excalibur LongThe Yin counterpart of the Dragon is here represented by the wise soul of the graceful phoenix, embracing the caliber with its wings and tail. Rarity and wisdom the Excalibur Feng is simply singular. Featuring one of the most complex of all Haute Horlogerie complications, the Excalibur Feng single flying tourbillon, with its plates and bridges pared down to extremes to only leave the essential, is a spectacular demonstration of radical watchmaking expertise.

As a flamboyant stage-setting to the highly technical nature of this tourbillon caliber, a 36mm case is here engraved with 18K rose gold. The already extraordinary allure of the Exclabur Feng is then completed with a bezel set with 48 brilliant-cut white diamonds.

Roger Dubuis - Excalibur Feng and Excalibur Long

Every part of the Feng, from the feathers to its body movement, has been fastidiously refined. Only by striking an obsessively balance in proportion and layout can the fascinating, vivid image of the Feng be brought to life, allowing it to spread its wings, with its plumage swirling around the tourbillon placed at the 7 o’clock mark.

Roger Dubuis - Excalibur Feng and Excalibur Long

These contemporary sculpted masterpieces feature a microscopic gold engraving technique – a delicate yet highly demanding craftsmanship skill highlighting their every detail: hairs, feathers, scales, and eyelids – giving life to this duo of sacred symbols in a deliberate way. A display of unparalleled expertise and craftsmanship, the Excalibur Long and Excalibur Feng are limited to eight pieces worldwide.

Roger Dubuis Excalibur Huracán STO Limited Edition

The 88-piece limited edition Excalibur Huracán STO watch by Roger Dubuis takes its design cues from the livery of the power-packed supercar Lamborghini Huracán STO.

Roger Dubuis Excalibur Huracán STO Limited Edition

The road-homologated super sports Huracán STO is itself inspired by the racing heritage of Lamborghini Squadra Corse’s one-make Huracán Super Trofeo EVO race series. It notably features rear-wheel drive and a V10 naturally-aspirated 640 hp engine, with the resulting acceleration and 310 km/h top speed ensuring an emotion-charged track experience on every outing.

Roger Dubuis Excalibur Huracán STO Limited Edition watch caseback

The 45 mm Excalibur Huracán STO watch is powered by an automatic RD630 calibre with a honeycomb motif. This extraordinary self-winding movement is fitted with a 12° angled balance wheel combined with a 360° oscillating weight. The latter reproduces the same kind of speed effect as a Huracán wheel and is a brilliant representation of the movement signature associated with Lamborghini Squadra Corse.

Roger Dubuis Excalibur Huracán STO Limited Edition watch

Topped with an upper calibre with a strut-bar design bridge reminiscent of those found on the V10 engine of the Lamborghini Huracán supercar itself, the Roger Dubuis Excalibur Huracán STO is housed in a sleek carbon case with a black DLC titanium bezel. Setting a vibrant finishing touch is an original strap on which perforated blue calfskin leather allows a sizzling view of orange fabric overlaying a comfortable rubber inner.

Roger Dubuis Excalibur Huracán STO Limited Edition

Technical details

Model: Excalibur Huracán STO
Reference: RDDBEX0828

Case
Skeletonized, Ø45 mm, SMC carbon case with rubber inlays, black DLC titanium bezel with lacquer markings, crown in black DLC titanium with lacquer ring, sapphire crystal with metallization, black DLC titanium case back
Thickness: 13.3mm

Dial
Lower flange with transferred texts and minute track
Upper flange with Rhodium plated screw-like hour markers filled with SLN
Water resistance: 5 BAR (50 m)

Movement
RD630 Calibre: Automatic with 12° inclined sprung balance
Features: 12° inclined balance wheel, double barrel
Functions: Hours, Minutes, Seconds, Date
Decorations: main plate is shot-blasted and NAC coated. Bridges are shot-blasted and trued-up and NAC or PVD coated
Number of parts: 233 components
Jewels: 29
Diameter: 16’’’
Thickness: 7.78mm
Frequency: 4 Hz (28’800 vph)
Power-reserve: 60 hours

Strap
Rubber base with perforated calf leather inlay
Pirelli P Zero Trofeo R pattern on the lining
Quick Release System – QRS – interchangeability

Buckle
Black DLC titanium cover with titanium blades, triple folding
Quick Release System – QRS – interchangeability

Limited edition
88 pieces