C by Romain Gauthier Titanium Edition Two

After the launch of the titanium edition one, independent luxury Swiss watch brand Romain Gauthier presents C by Romain Gauthier Titanium Edition Two.

C stands for Continuum, a new watch series that reflects Romain’s creative freedom with a modern and youthful design. It was launched in 2021 with the Titanium Edition One model.

Romain Gauthier now presents the second edition with subtle red highlights. Made of black Grade 5 titanium, the case remains contemporary and uncluttered. It also offers comfort and ergonomics. The dial, also in black Grade 5 titanium, adds to the consistency of the piece and evokes a sense of continuity, as there is no circle completes the time indication.

The hour-minute hands are actually off-centred on the horizontal axis and the hour indices taper ever so slightly and are of varying lengths, while the 5-second intervals of the small seconds at 7 o’clock are also marked by tapering bright red lines of differing lengths.

The tapering, three-dimensional hands and index are made from of 18k white gold and filled with Super-LumiNova for enhanced legibility, as are the numerals and applied hour markers, each of which has been produced from a single piece of white gold and features bevelled edges to give a punchy presence. The dial plate itself is made of black titanium that has been sand-blasted and treated with a special coating that protects it against UV rays.

The titanium bezel boasts an eye-catching, geometric profile that is unlike anything previously seen on a Romain Gauthier timepiece. The bezel is first machined into a round shape featuring a circular bevel before six straight sides are cut into it to create6 facets. While these facets, which have been polished, reflect the light and bring the bezel to life, the rest of the bezel absorbs light thanks to its satin-finishing. The same facetted design is replicated around the sapphire crystal on the back of the watch.

On this second edition, the case, as well as the lugs and buckle, made of grade 5 natural titanium, have been coated with a technical ADLC treatment allowing an aesthetical black finish. This carbon-based coating reinforces the scratch and shock resistance, hypoallergenic, it is also resistant to chemicals products and solvents.

In between the bezel and caseback, the one-piece caseband and lugs are geometrically sculpted, with satin and polished finishes as well as aesthetic grooves cleverly deployed to draw out the resulting shapes. Meanwhile, the rubber strap with titanium pin buckle follows the form of the angular lugs and rounded case band so it appears as a continuous, organic extension of the case.

And not for the first time in his work, Romain has placed the crown for winding and time-setting at 2 o’clock, freeing up space for wrist movement. A rubber ring around the crown makes it easier to manipulate, as well as adding a dash of colour to the timepiece.

Romain has endowed C by Romain Gauthier with a stop-seconds – or hacking seconds – mechanism, allowing the wearer to set the time exactly according to a reference time.

Like many stop-seconds mechanisms, a brake is placed on the balance wheel when the crown is pulled out. But instead of using a straight or L-shaped balance stop lever to halt the balance, Romain has opted for a snail cam that performs a double function: It touches and stops the balance wheel when the crown is pulled out and, when the crown is pushed back in, the snail cam makes a turn, with its increasingly wide form giving the balance an impulse to help it start beating again.

Those familiar with the brand will know Romain has used the snail cam’s unique shape in his past creations: It appears on the watchmaker’s acclaimed Logical One.

The manual-winding, in-house movement can be admired through the display back. It incorporates several finger bridges – historically typical of the Vallée de Joux, Romain’s birthplace – but reinterpreted here in a contemporary way.

These bridges are horizontally configured and feature a ‘stepped’ shape – previously seen on some of Logical One’s bridges – that not only provides volume and depth, but also gives the sense that the bridges are literally flowing over the gears and balance wheel, with no clear end to them.

Like the case components and the dial plate, the bridges are made from lightweight, black Grade 5 titanium and they boast contrasting tones and textures thanks to a variety of finishes. The outer edges of each bridge all feature a double bevel, while the flat bridge surfaces and rubies are each framed by a raised border that has been straight-grained.

Within these borders, the hand-finishing specialists at Manufacture Romain Gauthier used a special hand-engraving technique to create a highly original dimpled texture. The movement main plate beneath has been hand frosted.

The impressive decoration doesn’t lie only on the bridges and the main plate: Romain’s trademark gears and ratchet wheel featuring circular, bevelled spokes have been circular-grained, while the click, snail cam and screws with S-slot heads – another signature of Romain – have been highly polished. Finally, the lid of the mainspring barrel has been embellished with a superb snailing decoration.

C by Romain Gauthier’s regulator features the Romain Gauthier balance wheel with curved arms and calibrated eccentric weights, plus hand-assembled pallet lever that is triangular for maximum rigidity.

C by Romain Gauthier Titanium Edition Two is a 38-piece limited edition, engraved “1 of 38” on the back of each movement.

Technical details

Model: C by Romain Gauthier Titanium Edition Two

In-house, hand-wound movement
Dimensions: 32.10 mm x 5.50 mm
Power reserve: 60 hours
Number of jewels: 24
Number of components:154
Balance frequency: 28,800 vph / 4Hz
Components made from: Titanium, steel, stainless steel and German silver
Finishing: Superlative decoration by hand
Movement material: Natural Grade 5 titanium
Treatment: Rhodium-treated gears

Off-centred hours and minutes
Small seconds at 7 o’clock

Dial and hands
Dial in sandblasted Grade 5 titanium coated with black PVD and protective layer against UV rays
Off-centred hours and minutes
Small seconds at 7 o’clock with 5-second intervals marked by tapering bright red lines
Red Super-LumiNova-filled18k white gold hands and applied numerals and hour markers

Material: Grade 5 titanium coated with black ALDC
Dimensions: 41mm x 9.55mm, lugs to lugs: 49.5 mm
Water resistance: 50m/5atm/160ft
Crown for winding and time-setting featuring coloured rubber ring, at 2 o’clock
Watch supplied with a rubber crown ring in red.
Sapphire crystal with interior anti-reflection coating, front and display back

Supplied with black rubber strap with specially developed, satin-finished and polished Grade 5 titanium pin buckle coated with black ADLC

Total weight of the watch
55g, including rubber strap and pin buckle

Retail price
CHF 38,000 without taxes

38-piece limited edition in black Grade 5 titanium, engraved “1 of 38” on the back of the movement