Singer Reimagined Track1 SKLT Edition

Unveiled during the Watch Week Geneva 2022, the Track1 – SKLT Edition is the first watch from Singer Reimagined with a skeleton dial, allowing the full beauty of its revolutionary movement to be unveiled.

Created with a mission to reimagine the sports chronograph, Track1 houses the award-winning Agengraphe movement. The Track 1 – SKLT Edition features a new-generation transparent dial, suspended over the movement, allowing a view of the components below.

Singer Reimagined Track1 SKLT Edition

Shaped as a structural chassis, the open-work dial reveals the signature minutes wheel below, highlighted in a golden finish, to match the aesthetic of this special watch. Underneath the minutes wheel lies the automatic rotor itself.

Through the open-work dial of the Track1 – SKLT Edition, these vital elements of the movement are finally exposed and visible, revealing the secret of the automatic system for the first time.

Singer Reimagined Track1 SKLT Edition

At the outer edge of the watch, the ceramic rotating hours and minutes discs carry engraved numerals filled in golden Superluminova®, against a matte black background.

On the dial flange, a tachymetric scale is presented with black numerals against a circular brushed golden background. The Singer name is carved from metal and becomes three-dimensional, floating over the visible movement.

Singer Reimagined Track1 SKLT Edition

The transparent sapphire ring, suspended and riveted to the chassis, carries the single base 60 scale, dedicated to all chronograph functions. This feature, a signature of the Track 1, allows each chrono hand (seconds, minutes and hours) to point to the same scale, improving clarity.

Five alternating, hand-applied finishes are used on to highlight the dynamic shapes of this watch. The circular-brushed upper case surface creates vibrant reflections. Contrasting hand-polished edges frame the sleek profile of the watch and highlight the horizontal brushing used for the case sides.

Singer Reimagined Track1 SKLT Edition

On the back of the case, concentric circular brushing focuses the eye on the beautiful complexity of the Agengraphe movement. Finally, the strap housing is sand-blasted to provide functional durability.

Thanks to a radically new architecture, the AgenGraphe brings together all the chronograph functions in the centre of the watch, allowing for an easy and intuitive reading of elapsed time. To further enhance legibility, the chronograph incorporates jumping minute and hour indicators.

Singer Reimagined Track1 SKLT Edition

To connect the chronograph mechanism to the timekeeping gear train, the AgenGraphe features an innovative clutch mechanism. The coupling is made horizontally which requires less space, yet it is made using friction, just like a vertical clutch.

The dial-side rotor (made possible because the hands are on a central axis) leaves an unimpeded view of the movement and its 477 meticulously hand-finished parts.

Singer Reimagined Track1 SKLT Edition

The hand-made strap is executed in black textile, with golden contrast stitching and black titanium grommets.

The Singer Track1 – SKLT Edition is produced as a limited edition of 15 numbered units.

Technical details

Model: Singer Track1 SKLT Edition

Calibre Singer Reimagined 6361 Automatic mechanical movement. Column-wheel chronograph, AgenGraphe, Singer Reimagined exclusive 3-60 indication centralized instantaneous chronograph hours (60 hours) and minutes (60 minutes) sweep chronograph second hand (60 seconds)
Dimensions: 34.40 mm
Height: 7.18 mm
Number of parts: 477
Number of jewels: 67
Power reserve: 60 hours
Escapement: Swiss lever
Balance: Flat with AgenPit regulator
Frequency: 21’600 vph (3 Hz)

Hours, minutes on peripheral discs, central chronograph with instantaneous hours, instantaneous minutes and sweeping seconds

Material: 18k yellow gold (1N)
Diameter 43 mm
Height 15 mm
Crystal: Sapphire with double-sided antireflective coating
Back: Screwed with sapphire crystal
Water resistance 10 ATM / 100 meters

Material: Black textile
Rivets: Screw down rivets in brushed grade 5 titanium with DLC coating
(Singer Reimagined offers a rich choice of custom-made straps upon request. These can be personalized to fit the style of each client).

Folding buckle
Material: Brushed Black DLC coated steel with polished edges

CHF 90’000 (excluding VAT and local taxes)

Limited edition of 15 numbered pieces