Using its orbiting satellite hours and minute hands, the UR-100 watch by URWERK displays both time (hours and minutes) and space (distance travelled). The independent Swiss luxury watch brand now merges these two concepts in the creation of the all-new UR-100 SpaceTime.
The UR-100 SpaceTime features URWERK’s iconic orbital hour satellites, differing however in one significant way. Rather than the red-arrow-tipped minute pointers on the hour satellites disappearing after 60 minutes when replaced by the next, the UR-100 minute arrow passes beneath and between subsidiary dials, reappearing to display intriguing new astronomical indications: distance travelled on Earth and distance travelled by Earth.
Directly opposite at 2 o’clock, the same hand (well it looks like the same hand, but is actually one of three) continues its journey to another celestial indication featuring the distance the Earth has travelled in its orbit around the sun – a journey spanning some 35,740 km every 20 minutes. The UR-100 simultaneously presents three different space-time realities, providing a thought-provoking reminder of our voyage through time and space.
Powering the UR-100 SpaceTime is the automatic Caliber12.01, with baseplates in ARCAP and a power reserve of 48 hours. The automatic winding rotor is regulated by a flat turbine, the Windfäng(Swiss German for “air trap”) that minimizes shocks to the rotor bearing and reduces over-winding and wear and tear. The rotor, which is partially supported on its periphery by the flat turbine, also has a larger diameter, resulting in a lower mass and therefore less wear.
In-house testing of the flat turbine rotor regulation system found that it provided significant and exponential protection against excessive rotor speeds (the Windfänger rotates six times for every rotation of the winding rotor).
The design and construction of the URWERK Caliber12.01 required incredibly high precision because of the extremely tight tolerances between the minute hand and three different dials and domed sapphire crystal it passes between.
The shape of the case may remind URWERK aficionados of the aesthetics of the brand’s early watches.
The URWERK UR-100 was inspired by a nineteenth-century pendulum clock —a present to Felix Baumgartner from his father Geri, a now-retired renowned clock restorer —made by Gustave Sandoz for the 1893 World’s Fair in Chicago.
The regulator-style dial does not show time. Instead it shows the distance of the Earth’s rotation at the equator. The extra-long pendulum beats every 2.16 seconds, making every oscillation one kilometer. The main dial has a scale of 10,000 kilometers, shown in units of 100 kilometers, so that each tick (half oscillation) indicates 500 meters traveled on the Earth’s surface (at the equator).
The top subdial(10km) is divided into 10 units, while the lower subdial showing a total of 40,000 km — approximately the equatorial circumference of the Earth — is divided into increments of 1,000km.
URWERK presents two introductory editions: the UR-100 Iron (titanium and steel) and the UR-100 Black (titanium and steel with black PVD), both limited to 25 pieces.
Caliber: UR 12.01 with self-winding system governed by low-profile planetary turbine minimizing over-winding and wear
Frequency: 28,800vph – 4Hz
Power reserve: 48 hours
Materials: Orbital satellite hours turning on Geneva crosses in beryllium bronze; open-worked aluminum carousel; triple baseplates in ARCAP
Finishes: Circular graining, sanding, brushing
Chamfered screw heads
Hour and minute indications in Super-LumiNova
Orbital hours; minutes, distance travelled on Earth’s equator in 20 minutes, distance Earth travels around the sun in 20 minutes
Materials: Case in black PVD-coated titanium and stainless steel
Dimensions: Width 41.0 mm, length: 49.7 mm, thickness: 14.0 mm
Glass: Sapphire crystal
Water resistance: Pressure tested to 3ATM (30m)
CHF 48,000 (Swiss francs / tax not included)