Romain Gauthier Prestige HMS Stainless Steel Limited Edition with Henbury Meteorite Dial

Prestige HMS Stainless Steel – Romain Gauthier’s first series watch in this material – features a stunning dial crafted from ultra rare Henbury meteorite boasting exceptionally coarse intersecting bands of nickel-iron crystal that spectacularly shimmer as the wearer turns the watch.

Powering the hour, minute and second indications is the innovatively engineered, superlatively hand-finished in-house Calibre 2206 HMS, on full show through the display back and wound using an ingenious large-diameter crown configured ‘flat’ on the caseback. Prestige HMS Stainless Steel is a 10-piece limited edition.

The meteorite used to make the dial is an octahedrite – an iron meteorite – that was discovered in 1931 at the Henbury crater field in the Northern Territory of Australia, one of the country’s best known meteorite impact sites.

The meteorite looks like a fairly ordinary chunk of grey metal until it is subjected to a nitric acid treatment that reveals intersecting bands of nickel-iron crystal, known as Widmanstätten patterns or Thomson structures. These structures formed during a long period of cooling within the parent asteroid.

To make the dial, a combination of three-axe machining centre and electrical discharge machining is used to a create a disc of the meteorite that is 33mm in diameter and 0.8mm thick. An anti-corrosion treatment is applied to ensure its appearance will not deteriorate over time.

Apart from the piece used here, the only other known sample of this Henbury meteorite is housed in the South Australian Museum of minerals, meteorites and rocks in Adelaide.

Indeed, this particular meteorite specimen is extremely rare and it is remarkable for the coarseness of its nickel-iron crystal bands, also called lamellae, producing a really eye-catching Widmanstätten pattern. As the angle at which the observer looks at the dial changes, the many lamellae shimmer, lending the dial a real vivacity.

The HMS of Prestige HMS stands for hours, minutes and seconds. Hours and minutes are displayed in the large subdial at 12 o’clock, with small seconds at 5 o’clock. This 5 o’clock position makes for an easy reading of time: Once the wearer reads the hour-minute subdial, their eye is then naturally drawn to the seconds display. The hands are all in blackened steel, with the hour-minute hands Super-LumiNova-filled to stand out against the shimmering meteorite backdrop, while the white gold applique hour markers also feature this lume for greater legibility at night.

Given the ferrous content of the meteorite dial, Romain thought it made perfect sense to pair the dial with a case also made from a ferrous substance – stainless steel – the first time the watchmaker has created a series watch in this material.

The 43mm-diameter case is distinguished by pure, clean, unbroken lines around its full perimeter. It is the absence of a ‘normal’ crown protruding at 3 o’clock that signals something special might be going on around the back of the watch.

Indeed, Prestige HMS is wound using a ‘flat’ crown on the caseback. This increases winding efficiency because, unlike a traditional caseband crown, energy need not be transmitted through 90°. The large diameter and undulating profile of the crown enable effortless winding, even while on the wrist. The crown is pulled out for time-setting.

The crown system features a tiny ceramic ball and rubber spring. This combination handles the radial and axial forces exerted during winding and time-setting better than a conventional crown spring would, while the ceramic used for the ball is resistant to wear and reduces friction for a smooth functioning. Two o-ring seals – one of which is oversized –provide the necessary waterproofing and dust protection, especially when the crown is pulled out to set the time.

Contrasting finishes have been applied to enhance the stainless steel case: The bezel and caseband are sumptuously polished, while the caseback, crown and front and back of the lugs bear a subtle sheen, having been satin finished.

Turning over the watch, it is not just the caseback crown that we see, but also the Calibre 2206 HMS on show through the display back. This movement – boasting a 60-hour power reserve – was developed, produced, decorated, assembled and regulated at Manufacture Romain Gauthier in the Vallée de Joux, Switzerland. Virtually every component bears Romain’s distinctive touch.

The movement adheres to the watchmaking tradition of Romain’s native Vallée de Joux by mainly having one mobile for each bridge (a mobile being a gear on a pinion or shaft).These finger bridges feature polished, rounded bevels that have been meticulously created by hand, as well as hand-chamfered and hand-polished jewel countersinks.

The bridges and mainplate are black NAC-treated, but the straight-graining on the bridges makes them stand out against the hand-frosted mainplate, while the black NAC sets off the rhodium-treated, circular-grained gears. The gear recesses and backs of the bridges are spotted, while there is snailing on both sides of the mainspring barrel. In total, as many as 60 hours have been devoted to hand-decorating the movement, even those components that are not visible.

The movement architecture is such that the observer can even see through the components to glimpse the disc of meteorite forming the dial.

Bespoke balance wheel and triangular pallet lever: The regulator features the Romain Gauthier balance wheel with curved arms and calibrated eccentric weights, plus hand-assembled pallet lever that is triangular for maximum rigidity.

Gears with circular spokes and high-efficiency teeth: The gears possess circular spokes that provide elegance and strength, while the patented, high-efficiency profiles of the gear teeth are designed for optimal contact.

S-slot screw heads: The signature screw heads bear an S-slot that not only is aesthetic, but also enables more torque to be applied during movement assembly.

Technical details


Stainless steel case featuring dial made from rare Henbury meteorite – 10-piece limited edition

Features and indications
Hours, minutes and seconds
Entire dial made from rare Henbury octahedrite meteorite
Stainless steel case
Flat crown on caseback for ergonomic winding
Finely hand-finished, in-house movement visible through display back

Dial and hands
Off-centre hour-minute subdial at 12 o’clock
Small seconds at 5 o’clock
Super-LumiNova-filled hour and minute hands in blackened steel
Small second hand in blackened steel
Super-LumiNova-filled white gold applique hour markers

Meteorite details
Discovered at: Henbury Meteorites Conservation Reserve, Northern Territory, Australia
Year of discovery: 1931
Classification: Octahedrite

Movement and finishing
In-house movement Calibre 2206 HMS
Dimensions: 34mm x 5.5mm
Power reserve: 60 hours
Number of jewels: 22
Number of components: 128
Balance frequency: 28,800 vph / 4Hz
Finishing: Highest-level haute horlogerie hand-finishing
Treatment: Black NAC-treated bridges and rhodium-treated gears

Material: Stainless steel
Dimensions: 43mm x 12.1mm
Water resistance: 10m/1atm/30ft
Flat crown on caseback for ergonomic winding, pulled out for time-setting
Sapphire crystal with interior anti-reflection coating, front and display back

Strap and buckle
Black alligator leather with satin-finished stainless steel pin buckle

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.