As a new addition to the Chronoswiss Regulator family in 2016, the Sirius Regulator Classic stands out by its classic and timeless appearance in combination with fresh and sporty emphases. Distinguished details such as the guilloched interior of the display for hours and seconds, the precisely aligned length of the hands and the thrilling contrast between matt-finished and polished surfaces create a harmonious overall appearance.
Not least with its carefully selected combinations of colours and materials Chronoswiss has created an unconventional automatic watch that masters the balancing act between watchmaker tradition and timeless design.
|Sirius Regulator Classic CH-8723-SI: Stainless steel case, galvanic silver dial|
The model with the 40 mm case made from stainless steel is available in three variants: in an entirely purist form with a dial in galvanic silver and thermally blued hands or, less conventional, in deep midnight blue, while the blue is echoed in both models by the interior of the calfskin strap.
|Sirius Regulator Classic CH-8723-BL: Stainless steel case, galvanic blue dial|
The third variant is all classic and sporty: On the dial in galvanic black, signal red tones add that little dynamic extra that is emphasised by the casual rally design of the strap with red colour elements.
|Sirius Regulator Classic CH-8723-BK-RALLYE: Stainless steel case, galvanic black dial|
Model: Sirius Regulator Classic
CH-8723-SI: Stainless steel, dial galvanic silver
CH-8723-BL: Stainless steel, dial galvanic blue
CH-8723-BK-RALLYE: Stainless steel, dial galvanic black
Regulator with central minutes and small seconds
Solid stainless steel case, satin finish and polished
Bezel with partial knurling
Non-reflecting sapphire crystal
Screw-down case back with satin finish and sapphire crystal
Water resistance up to 3 bar
Strap holders screwed down with patented Autobloc system
Dimensions: Ø 40 mm, height 10.45 mm
Chronoswiss Caliber C.291, automatic
Diameter: Ø 30mm (approx. 13´´´)
Height: 6.35 mm
Balance: Glucydur, three-legged
Balance spring: Anachron
Fine adjustment: Via eccentric cam
Shock protection: Incabloc
Frequency: 4 Hz., 28,800 A/h (semi-oscillations)
Power reserve: Approx. 38 hours
Finish: Rhodium-plated and engraved rotor with Geneva Stripes, ball bearing mounted; circular-grained plate and bridges; polished lever, escape wheel and screws
Matt centre, circular-grained rings, totalisers with guilloche, galvanised in various colours depending on design
Feuille shape; curved, and thermally blued or rhodium-plated and diamond cut or lacquered
Embossed calfskin, with blue or red leather lining and corresponding stitching, or perforated with red coating