CHRONOSWISS Sirius Flying Regulator

The new Sirius Flying Regulator from CHRONOSWISS features a “flying” minute dial and sub-dials for hours and seconds, which stand out from the guilloche base. The high-quality, slightly curved sapphire crystal further draws attention to the dial’s three- dimensionality.

Inside this exquisite watch, the tried and tested manufacture calibre C.122, which already moved the legendary Régulateur Automatique, the first automatic model featuring a regulator-style dial by Chronoswiss, can be seen through the glass back.

Externally, the Flying Regulator shines with its classic stainless steel or red gold case as well as with its dial featuring the characteristic Flying Regulator signature guilloche, which has been specially designed for this line in the studios of Lucerne-based House of Chronoswiss. This guilloche pattern is made even more stunning by electroplating which enhances the dial in either silver, black or a very dark midnight blue.

CHRONOSWISS Sirius Flying Regulator watch

For a sportier look, the Flying Regulator is also available with a DLC-coated stainless steel case giving it a dark, almost ceramic appearance. The dynamic elegance of this watch is complemented by matching straps with coloured insides and contrast stitching.

Made of elegant alligator leather or sporty calfskin embossed with an elaborate plaiting pattern they complete the Flying Regulator’s extravagant look.

Technical details

Model: CHRONOSWISS Sirius Flying Regulator

CH-1241.3R-SISI: 18 ct. Red gold, dial galvanic silver
CH-1241.3R-BKBK: 18 ct. Red gold, dial galvanic black
CH-1245.3-BKBK: Stainless steel, DLC coated, dial galvanic black
CH-1245.3-BKBL: Stainless steel, DLC coated, dial galvanic blue
CH-1243.3-SISI: Stainless steel, dial galvanic silver
CH-1243.3-BLBL: Stainless steel, dial galvanic blue

Off-centre hours at 12:00, central minutes, small seconds at 6:00

Solid red gold or stainless steel case, satin finish and polished, bezel with side knurling and curved, non-reflecting sapphire crystal, screw down case back with satin finish and flat sapphire crystal, onion crown, water resistance up to 3 bar, strap holders screwed down with patented Autobloc system
Dimensions: Ø 40 mm, height 12 mm

Chronoswiss manufacture calibre C.122
Diameter: Ø 26.80 mm / Ø 26.40 mm (11 ¾´´)
Height: 5.30 mm
Jewels: 30
Balance: Glucydur, three-legged
Balance spring: Nivarox I
Fine adjustment: Index via eccentric cam
Shock protection: Incabloc
Stroke rate: 3 Hz., 21,600 A/h (oscillations)
Power reserve: Approx. 45 hours
Finish: Rhodinised or gold-plated, skeletonised rotor with Geneva Stripes, ball bearing mounted; circular-grained plate; bridges with Geneva Stripes and circular-grained offsets; gold-plated engraving and jewel settings; polished lever, escape wheel and screws

Guilloche base with “flying” sub-dial floating above screwed plinths, galvanised in different colour combinations
Watch hands: Shape Poire Losange; curved and either thermally blued, gold-plated or lacquered depending on the model

Louisiana alligator leather or embossed calfskin

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.