After surprising the world of high end watchmaking with hydro mechanical watches H1 & H2, the young Swiss watch maker HYT presents H3, a brand new timepiece inspired by a fluid portrayal of time, a field which the young independent brand has been mastered.

With the H3, the brand is deconstructing time and reconstructing it around its founding principle: two bellows injecting a capillary with fluid which moves to display the time. In the conventional sense, there is no midday and there are no hands. The H3 is reinventing the wrist watch with its case measuring 62 x 41 mm. Its bespoke shaped movement is a perfect fit for each contour.

HYT and its partners have succeeded in creating a timepiece with a highly complex architecture. One of the main challenges lay in machining the case and the sapphire crystal. When it came to the movement, one of the most delicate steps in creating the H3 involved recovering the energy provided in the retrograde movement, which then powered the semi-instantaneous rotation of the watch’s dial.

Its construction was initially inspired by the desire to have a linear portrayal of time, which resulted in a design with the bellows at opposite ends. The movement engineering teams then worked around this constraint – which became the stylistic signature of the H3 – to create the complete calibre.

The upper part of this living sculpture houses the bellows mechanism. The first, on the left, drives the progression of the fluid and therefore the time display. Its counterpart, on the right, compensates for this progression in the capillary. Less than one millimetre in diameter, this glass tube, operating in a vacuum, still contains two fluids: the first, (water-based) yellow fluid serves to tell the time; the second (viscous-based) translucent fluid works in opposition. A meniscus separates them.

The central part of the H3 is reserved for the time display. This features neither hands, nor satellite, nor any other system of time-reading ever invented before. Instead, HYT has created a rotating dial with 4 faces arranged along the time display tube. Each of these faces is graduated with 6 hours, thereby enabling the 24 hours of the day to be displayed.

To ensure a harmonious and linear progression between the hours, HYT has developed an exclusive movement. A complication is used to rotate the dial on itself, to display the section concerned for the current time. The other three faces are not visible. At the end of each 6-hour period, the time display makes a retrograde movement. During this time lapse, the dial begins a controlled rotation, enabling the time display to jump semi- instantaneously. When the liquid’s retrograde movement is engaged, the calibre then uses the energy stored in the bellows and provides the force needed by the hour dial movement.

To ensure the technical and stylistic cohesion of the H3, HYT has also developed a linear display for the minutes. On the lower right-hand part of the timepiece, there is a twin articulated arm which sweeps across a graduated rule. At its end, the retrograde mechanism instantaneously returns to its starting point.

The time is set using a push-button, located on the left of the assembly. With each press, the central time display bar turns on itself by one quarter of a turn. This ingenious principle enables the desired time period to be quickly set by jumping in periods of six hours. Next, the circular movement of the crown enables the exact hour and minutes chosen to be set within this period.

Each of the H3’s vital organs therefore follows its own rhythm, bringing the dial to life as well revitalising time itself. Exclusively composed by HYT, the choreography was once again orchestrated by APRP (Audemars Piguet Renaud & Papi), also responsible for its predecessor, the H2.

As HYT had explained from the very start, the H3 stands out as the most exceptional timepiece in the brand’s collections. Thanks to its two barrels, it boasts a 170-hour power reserve (equivalent to around 7 days).

Produced in charcoal grey PVD-coated titanium and platinum, the series will be limited to 25 timepieces. The first timepieces will be available from September 2015.

Technical details

Model: HYT 3
Reference: 361-TP-01-GF-AG
Series limited to 25 pieces

Case
Charcoal grey PVD-coated titanium and platinum with a micro-blasted, satin finish
Length: 62 mm;
Width: 41 mm
Height: 16 mm
Screw-down dynamometric crown sheathed in rubber
Screwed offset lugs
Domed sapphire crystal (box) with anti-reflection coating
Open screw-down back in titanium
Water-resistant to 30 metres

Functions
Retrograde fluidic hours
Retrograde minute indicator
Crown position indicator (T-N-W)
Power reserve indicator (on back)
Push-button for hour rotation

Movement
Mechanical with manual winding, exclusive HYT calibre
21,600 Vph, 3 Hz, 53 jewels
Decorated micro-blasted charcoal grey PVD-coated titanium bridges with titanium-coloured satin-finished accents, rhodium-plated bellows
170-hour (7-day) power reserve

Dial
Sapphire minutes dial
Aluminium hours dial

Strap
Black alligator leather
Charcoal grey PVD-coated titanium folding buckle