Alpina Alpiner 4 Manufacture Flyback Chronograph (With New Manufacture Calibre AL-760 Automatic)

At Baselworld 2015, traditional Swiss watch brand Alpina launched its first automatic chronograph produced in-house.

With the new automatic calibre AL-760, the technicians made the considered choice of a modular mode of construction based on the tried and tested AL-710 with a winding rotor operating in both directions. The control mechanism of the front-mounted chronograph is distinguished by its ingenious construction, which achieves the highest degree of functionality with only 96 components.

Special features of the new chronograph include a directly actuated flyback function. With this useful function, the 8th-second chronograph can be stopped and restarted from zero by pressing the push-piece just once. This function was invented in the 1930s to make it easier for pilots to use this most essential of instruments.

In this case, the push-piece at 4 o’clock and its associated mechanism cause three tasks to be performed very quickly one after the other: first, the clutch is disengaged; secondly, the chronograph is reset to zero by means of the single-piece hammer, whose sloping surfaces turn the two zero reset hearts so that the hands position themselves vertically again; and thirdly, the clutch engages once more as soon as the push-piece is released.

The highly complex sequence of movements involved in this case proceeds directly from the push-piece to the clutch lever. This instant type of flyback is another instance of the unique details of construction of the new calibre AL-760.A counter at 3 o’clock adds cumulative times up to 30 minutes.

Opposite, at 9 o’clock, the permanent-seconds hand rotates as usual. And incorporated into the Super-LumiNova-highlighted dial with the utmost harmony, the date hand is positioned at 6 o’clock. Of course, Alpina also made the hands luminous at night.

The AL-760 movement beats at a frequency of 4 Hertz in its large stainless steel case, reminiscent of the legendary “Alpina 4” of 1938. The sportily elegant stainless steel case measuring 45 millimetres in diameter is equipped with ergonomically shaped chronograph push-pieces, screw-down winding and setting crown, and scratch-resistant sapphire crystal.

The screwed case back bears the well-known Alpina logo. The wristwatch, available with a stainless steel bracelet or alligator strap, is water-resistant to a pressure of ten atmospheres.

Technical details

Model: Alpina Alpiner 4 Manufacture Flyback Chronograph (With New Manufacture Calibre AL-760 Automatic)

Base movement AL-710 automatic small date
Automatic Mechanical Chronograph: central chronograph seconds, 30 minutes chronograph totalizer at 3h.
Start-Stop pusher at 2h
Return to zero pusher at 4h
Hours, minutes, seconds at 9,
Date by hand at 6h
13 ¼ line (30.5 mm diameter)
4 Hz, 28.800 Bph
38 Hour Power Reserve
Incabloc Antichoc(x2)
“Côtes de Genève” &“perlage” decoration
« Anglage » and « Rhodiage » on all bridges
PVD coated rotor decorated with « Côtes de Genève »

Number of movement parts
Flyback chronograph module: 96
Platine and bridges: 10
Automatic wheels: 4
Tirette systems: 8
Reglage systems: 7
Assortments: 10
Jewels: 32
Screws: 45
Rotor: 1
Other parts: 51
Total: 233

Stainless steel
44 mm diameter
Antimagnetic through soft iron core movement cage (ISO certified)
Antishock through soft iron core movement cage (ISO certified)
Scratch-resistant Sapphire Crystal
Screw-in crown and case-back
10 ATM / 100M / 330 FT Water-resistant
Engraved case-back

Black or silvered dial with applied indexes
Date window at 6 o’clock
Telemeter scale
White luminous coated hour and minute hands
White luminous coated indexes

Black genuine alligator strap or stainless steel bracelet

Related links

Leave a Reply Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.