Prestigious German watch manufacture A. Lange & Söhne unveils Zeitwerk Minute Repeater, the first Lange watch with a decimal minute repeater.
In the exalted category of chiming wristwatches, the ZEITWERK MINUTE REPEATER is a technical sensation: articulately designed, it combines a mechanical jumping numerals display with a decimal minute repeater for the first time.
The ZEITWERK MINUTE REPEATER is the first A. Lange & Söhne model with a striking mechanism that sounds the hours, ten-minute intervals, and minutes. The acoustic sequence precisely reproduces the digitally displayed time whenever the striking mechanism is triggered with a pusher.
The dial time is sounded with a low-pitched tone for each elapsed hour, a double tone for each elapsed ten-minute period, and a high pitched tone for each elapsed minute.
When they developed the strike work for the ZEITWERK MINUTE REPEATER, the engineers were able to harness the basic principle of the jumping numerals mechanism. The time is displayed with an hour ring and two minute discs instead of with hands. Three snails connected with these mechanical display elements separately sample the number of hours, ten-minute intervals, and minutes to be acoustically indicated.
|Zeitwerk Minute Repeater Striking Mechanism|
In place of the conventional slide, the ZEITWERK MINUTE REPEATER features an elaborate pusher system for activating the striking mechanism. To maximise the quality of the sound, the engineers calibrated the movement with the case down to the smallest detail. The tuning process requires acute hearing and is performed manually to achieve harmony and reverberation of each gong separately and to assure perfect sonority in unison.
|The L043.5 Manufacture movement|
Countless work steps and extensive fine-tuning are required to guarantee the smooth interaction and long-term functional integrity of all mechanisms of which the 771-part movement is composed. To rule out unintended, potentially damaging manipulations, the designers incorporated a very useful safety feature.
Since mechanical conflicts would occur if the owner were to set the time during a chiming sequence, the crown cannot be pulled while the striking mechanism is active: when activated, the winding train is uncoupled from the ratchet wheel that powers it. This precaution prevents the winding wheel train including the crown from turning while the gongs are being struck, which would waste a considerable amount of energy.
Additionally, the switching of the numeral discs maximum succession of tones at 12:59. The acoustic time indication therefore always corresponds to the time displayed on the dial.
To assure that the repeater sequence is not prematurely interrupted due to the depletion of the mainspring’s power – in which case the watch would stop running as well –, the striking mechanism can no longer be activated if the remaining power reserve is less than twelve hours. On the power-reserve indicator, this point is identified with a red mark.
Because the mainspring powers the striking mechanism via the ratchet wheel, the number of minute repeater activations and their duration will influence the availability of the underlying power reserve of 36 hours.
With its eminently legible jumping numerals display, the ZEITWERK MINUTE REPEATER stands out as a paragon of eloquent design. The patented constant-force escapement delivers a uniform amount of energy during the entire power-reserve period. As the source of the switching impulses, it reliably controls the numerals display minute by minute.
The L043.5 manufacture calibre inside the ZEITWERK MINUTE REPEATER is lavishly and meticulously hand-finished. Beneath the hand-engraved balance cock, the balance wheel with eccentric poising weights and a free-sprung balance spring crafted in-house breathes with a frequency of 18,000 semi-oscillations per hour. The resonant timekeeping instrument with a diameter of 44.2 millimetres is available exclusively in platinum.
The solid-silver dial shimmers with a rhodié hue. Made of black-rhodiumed German silver, the time bridge prominently frames the hour and minute numeral apertures that are located on the same plane.
The black-polished steel gong hammers are visibly arranged on both sides of the subsidiary seconds dial. The hours are struck on the left, the single minutes on the right. For the double-tone ten-minute counts, both hammers strike both gongs slightly offset in time.
Lange’s ZEITWERK MINUTE REPEATER is the second model of the ZEITWERK family to be endowed with an acoustic time indication. With its unusual design, it represents a further milestone in A. Lange & Söhne’s impressive repertoire of innovative timepiece concepts.
Model: ZEITWERK MINUTE REPEATER (Ref. 147.025F)
Lange manufacture calibre L043.5, manually wound, crafted to the most exacting Lange quality standards, decorated and assembled by hand; precision-adjusted in five positions; three quarter plate made of untreated German silver; balance cock engraved by hand; constant-force escapement
Movement dimensions – Diameter: 37.7 millimetres; height: 10.9 millimetres
Movement parts: 771
Screwed gold chatons: 3
Escapement: Lever escapement
Oscillator: Shock-resistant balance wheel with eccentric poising weights; balance spring manufactured in-house, frequency of 18,000 semi-oscillations per hour; precision beat adjustment system with lateral setscrew and whiplash spring
Power reserve: 36 hours when fully wound if the striking mechanism is not activated
Time display in hours and minutes with precisely jumping numeral discs, subsidiary seconds with stop seconds, power reserve indicator, striking mechanism with decimal minute repeater
Crown for winding the watch and setting the time; pusher for activating the striking mechanism
Diameter: 44.2 millimetres; height: 14.1 millimetres
Crystal and back: Sapphire crystal (Mohs hardness 9)
Solid silver, rhodié
Time Bridge: Black rhodiumed German silver
Hand: Rhodiumed gold
Hand-stitched alligator leather strap, black
Buckle: Lange deployant buckle in platinum