Longines Heritage Diver

Longines pays tribute to the achievements of pioneers in underwater exploration with its new Heritage Diver. Available in two versions – one with three hands and the other a chronograph – these timepieces are re-issues of watches intended for use by divers produced in the 1970s.

The cushion-shaped steel case is the same diameter as the original model and is water-resistant to 30 bar. The black, satin-finish dial elegantly combines red highlights and details coated with Super-LumiNova®, recalling the characteristic design of the original creations.

Longines Heritage Diver Three Hands Version
Longines Heritage Diver Three Hands Version

The name Longines has long been associated with breathtaking feats achieved by pioneers who have always dared to go beyond their limits, notably in underwater exploration. In the 1950s the brand supplied measuring instruments for the bathyscaphe Trieste, which set a diving record in 1953.

In addition to technical equipment, Longines also produced robust and reliable watches intended for use by keen amateur divers. Dating from the 1970s, two such models have been taken as inspiration for the new Longines Heritage Diver watch.

Available in two versions, one with three hands and the other a chronograph, these new models boast a black, satin-finish dial that elegantly combines red highlights with details coated with Super LumiNova®. Moreover, both versions feature a bidirectional rotating inner flange.

Longines Heritage Diver Chronograph Version
Longines Heritage Diver Chronograph Version

Like the original creations, the two new models have a diameter of 43 mm. The case back, crown and bezel are screwed in, thus ensuring water-resistance to 30 bar (300 metres). The cushion-shaped steel case has a brushed sunburst decoration on the upper surface and is polished around the sides. The case back is engraved with the figure of a diver, recalling the first diving watches produced by Longines.

The model with 3 hands differs from the other with its daring mix of colours set off by the black dial, namely one red hand and red minute zones, touches of Super-LumiNova® coating and grey rhodium plating. The graduated scale from 0 up to 60 enables the diver to calculate how long he or she has been underwater by synchronising the 12 o’clock hour symbol with the minute hand.

The inner flange is activated using the crown at 2 o’clock. The chronograph version boasts the same colour scheme, but in contrast the graduated scale on the flange goes from 60 down to 0.

This enables the diver to calculate the remaining time, for example to allow for decompression when returning to the surface, by synchronising a given point with the minute hand.

The Longines Heritage Diver watches are fitted on a black synthetic or rubber strap.

Technical details

Model: Longines Heritage Diver Three Hands Version

Longines Heritage Diver Three Hands Version

Movement
Self-winding mechanical movement
Calibre L633.5 (ETA 2824-2)
11½ lines, 25 jewels, 28,800 vibrations per hour
38-hour power reserve

Functions
Hours, minutes, seconds and date at 3 o’clock

Case
Cushion-shaped, Ø 43 mm, steel
Screw-in bezel, case back and crown
Scratch-resistant sapphire glass coated with several anti-reflection layers
Water-resistant    To 30 bars (300 meters)

Dial
Black, satin-finish, 11 applied hour symbols coated with Super-LumiNova®, bidirectional rotating inner flange graduated from 0 to 60 with minute zones indicated in red
Hands: Rhodium-plated (hours and seconds) and red (minutes), hour and minute hands coated with Super-LumiNova®

Strap 
Black synthetic bracelet with small diving buckle
Black rubber bracelet with diving folding clasp

Model: Longines Heritage Diver Chronograph Version

Longines Heritage Diver Chronograph Version

Movement
Self-winding mechanical movement with chronograph mechanism
Calibre L651.3 (ETA 2894-2)
12½ lines, 37 jewels, 28,800 vibrations per hour
42-hour power reserve

Functions
Hours, minutes, seconds and date at 6 o’clock
Chronograph

Case
Cushion-shaped, Ø 43 mm, steel
Screw-in bezel, case back and crown
Scratch-resistant sapphire glass coated with several anti-reflection layers
Water-resistance : To 30 bar (300 meters)

Dial
Black, satin-finish, 11 applied hour symbols coated with Super-LumiNova®, bidirectional rotating inner flange graduated from 0 to 60 with minute zones indicated in red
Hands: Rhodium-plated (hours and seconds) and red (minutes), hour and minute hands coated with Super-LumiNova®

Strap
Black synthetic bracelet with small diving buckle
Black rubber bracelet with diving folding clasp


History of Longines Watches


Longines New Watch Models


Archives from 2011 to 2020


Archives 1990 to 2010