The new Luminor Submersible 1950 2500m 3 Days Automatic Titanio from Officine Panerai is an exceptional and robust diving timepiece dedicated to deep ocean adventures.
The Luminor 1950 case, 47 mm in diameter, of the Luminor Submersible 1950 2500m 3 Days Automatic Titanio is made of brushed titanium, a material which combines non-allergenic properties and lightness with the structural robustness required to resist high pressures, external stresses and corrosion.
The water resistance, also ensured by the classic Panerai device protecting the winding crown, is guaranteed to a depth of 2,500 metres, and the little valve engraved with the He symbol on the caseband at eight o’clock enables helium to escape when ascending from deep dives, thus preventing the gas exercising potentially dangerous pressure on the case.
The unidirectional rotating bezel, which moves precisely in one-minute clicks thanks to a special system patented by Officine Panerai, has small markers in relief, the design of which has been inspired by the model created in 1956 for the Egyptian Navy, and a graduated scale which enables the length of the dive to be read.
Protected by a sapphire crystal with a thickness of 5.9 mm, the hour markers on the black dial are bars or studs, applied in relief and coated with a luminous substance, as are the wide, partially skeletonised hands, thus ensuring optimum visibility even in the depths of the sea. A subsidiary dial at nine o’clock has a small seconds hand moving continuously, while the date window is at three o’clock.
The movement of the Luminor Submersible 1950 2500m 3 Days Automatic Titanio is the automatic P.9000 calibre, designed and produced entirely in the Officine Panerai manufacture in Neuchâtel. With a diameter of 13¾ lignes and 28 jewels, the P.9000 calibre has a balance wheel with four regulating screws, which makes 28,800 alternations/hour.
The single-piece oscillating weight can rotate in both directions and two spring barrels store a power reserve of three days. Identified by the reference PAM00364, the new Luminor Submersible 1950 2500m 3 Days Automatic Titanio is part of the Special Edition collection and has been produced in an edition limited to 500 units.
Completing it is a rubber strap, fastened by a large trapezoid-shaped buckle in brushed titanium. The strap is easily changed by means of the button fitted in the lug of the watch, which is operated by the special tool provided.
Model: Luminor Submersible 1950 2500m 3 Days Automatic Titanio – 47mm
Unique edition of 500 units
Automatic mechanical, Panerai P.9000 calibre, executed entirely by Panerai
13¾ lignes, 7.9 mm thick
Incabloc® anti-shock device
Power reserve 3 days, two barrels
Hours, minutes, small seconds
Calculation of immersion time
Case, dial & strap
Case: Diameter 47 mm, brushed titanium. Polished titanium helium valve.
Bezel: Brushed titanium with polished edges, anti-clockwise unidirectional rotating bezel with graduated scale for calculating the time of immersion and ratchet click at minute intervals.
Back: Screw, titanium.
Device protecting the crown: (protected as a trademark) Brushed titanium.
Dial: Black with applied luminous hour markers. Date at 3 o’clock, seconds at 9 o’clock.
Crystal: Sapphire, made of corundum, 5.9 mm thick. Anti-reflective coating.
Water-resistance: 250 bar (~ 2500 metres).
Strap: PANERAI personalised rubber strap and trapezoidal brushed titanium buckle. Supplied with a second interchangeable strap, a tool for changing the strap and a steel screwdriver.