The new F.P.Journe Precision Chronometer , the CHRONOMETRE BLEU proposes a new approach of high precision, with perfect chronometric virtues. The CHRONOMETRE BLEU is innovative with its 39 mm case made for the first time of Tantalum, a rare dark grey metal with blue overtones. Tantalum is a wonderful metal but rarely used in watchmaking as it is hard and very difficult to manipulate, due to its very high fusion temperature of 3000° and a density of 16.3. Tantalum is also precious as it is highly resistant to corrosion and wear.
The chrome blue dial is in perfect harmony with the colour of the case in a contemporary spirit. The F.P.Journe hands, matching the large cream-coloured Arabic numerals, mark the hours while the guilloché seconds dial at 7:30 enhances the mirror effect of the main dial. The manual winding movement of the CHRONOMETRE BLEU is made in 18K rose gold, like that of all F.P.Journe creations.
Signed with the label Invenit et Fecit- (invented and made), each F.P.Journe exclusive movement guarantees a manufacture calibre, invented, constructed, and assembled entirely in our Geneva workshops.
The manually wound movement of the CHRONOMETRE BLEU oscillates at 21,600v/h. Twin barrels, in the classic configuration of precision watches, work in parallel to deliver stable power for much of its 56-hour full autonomy. The F.P.Journe free-sprung chronometer balance with inertia adjustment on four opposing weights is dynamically adjusted to six positions, with an emphasis on constancy of rate.
The CHRONOMETRE BLEU will be available starting in November at all F.P.Journe Boutiques in New York, Beijing, Paris, Tokyo, Geneva, Hong Kong and Boca Raton, as well as through all authorized F.P.Journe retailers world-wide.
Manually wound by 38 turns
Movement in 18K rose gold
Dimensions of the Movement
Overall diameter: 30.40 mm
Casing-up diameter: 29.60 mm
Overall height: 3.75 mm
Height of winding system:2.10 mm
Diameter of stem thread: S0.90 mm
Four inertia weights
Flat Anachron microflamed spring
Mobile stud holders
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v / h, (3Hz)
Inertia: 10.10 mg /cm2
Angle of lift: 52°
Amplitude 0h dial up: > 320°;24h dial up: > 280°
Two mainspring barrels in parallel
Time adjustment via crown in position 2
Pallet escapement with 15 tooth escape wheel
Two position crown
Central hours and minutes, Sub-seconds at 7:30
56 hours +- 2h
Partly circular grained base plate, with barleycorn guilloché
Polished screw heads, chamfered slots
Pegs with polished rounded ends
Diameter: 39 mm
Height: 8.60 mm
Dial: Chrome blue
Number of Pieces
Movement without dial: 133
Cased-up on leather strap: 166