A. Lange & Söhne RICHARD LANGE Pour le Mérite Limited Edition

A. Lange & Söhne presents RICHARD LANGE Pour le Mérite, the third Lange wristwatch with a fusée-and-chain transmission mechanism.

This rare horological masterpiece with its three-part enamel dial takes inspiration from a historic A. Lange & Söhne pocket chronometer  created for the scientific elite. It dates back to around 1880 when Richard Lange, the company founder’s oldest son and technical director of the family business, was already inspiring the craft of precision watchmaking. Overall, only about 30 of these unusual timepieces were ever made.

RICHARD LANGE Pour le Mérite watch in platinum Reference 260. 025

A. Lange & Söhne RICHARD LANGE Pour le Mérite watch is available in platinum and 18K pink gold versions.

Following the TOURBILLON in the first collection and the TOURBOGRAPH presented in 2005, this RICHARD LANGE model also bears the distinction “Pour le Mérite”. At Lange, it is reserved for exceptional complications such as the fusée-and-chain transmission. It refers to the order of merit initiated in 1842 by the eminent explorer Alexander von Humboldt and which is still awarded to great scientists and artists.

The A. Lange & Söhne RICHARD LANGE “Pour le Mérite” is the second member of a watch family dedicated explicitly to greater precision in time measurement.

RICHARD LANGE Pour le Mérite watch in platinum Reference 260. 025

The first RICHARD LANGE watch, a large and extraordinary three-hand timepiece devoted to the tradition of scientific observation watches, was a role model of accuracy and lucid design. The new model has a case in platinum or pink gold with a diameter of 40.5mm, perceptibly enhancing legibility. Pure and well organized, the radiant white three-part enamel dial features narrow black Roman numerals for the hours and small red Arabic numerals for 15, 30, 45, and 60 minutes.

RICHARD LANGE Pour le Mérite watch in platinum Reference 260. 025

Thirty elaborate processes are needed to produce each of the three subsidiary dials. The result is an immaculate enamel face that sets a brightly contrasted stage for the classic blued-steel hands. An aperture in the dial that could have shown the fusée-and-chain mechanism from the front was deliberately omitted so that nothing would distract the owner from telling the exact time at a glance.

Thus, the second RICHARD LANGE also focuses the attention of its owner on the objective of all horological ambitions: the greatest possible degree of precision. It relies on an ingenious construction, a drive based on the chain-and-fusée principle used as early as the 15th century among others by Leonardo da Vinci.

RICHARD LANGE Pour le Mérite watch in pink gold Reference 260. 032

However, it takes the ultimate in know-how and dexterity to craft this intricate mechanism in a size that can be accommodated by a wristwatch. At the same time, it is much more effective in a wristwatch because it overcomes the greatest disadvantage of the winding train – the unavoidable loss of torque – by intelligently harnessing the principle of levers.

The fusée-and-chain transmission compensates for the declining spring force, keeping the effective torque constant across the entire power-reserve period. For this purpose, the drive function, usually handled by the mainspring barrel alone, is taken over by two components: the mainspring barrel and the adjacent tapered fusée.

The two components are connected by a dainty chain which in the case of the RICHARD LANGE “Pour le Mérite” consists of 636 individual parts. At one end, it is attached to the broad lower end of the fusée and at the other to the exterior of the spring barrel. A slot is milled into the conical surface of the fusée that leads to the narrowest point.

When the watch is being wound, the chain unreels from the outer wall of the barrel and wraps around the fusée until it arrives at the final point. In this state, the radius of the fusée, i.e. the magnitude of its leverage, is small but the torque delivered by the mainspring is large.

As the mainspring gradually unwinds, its power diminishes. But as the chain unreels from the fusée and back onto the barrel, the length of its lever – the effective radius of the fusée – increases by the exact same measure as the spring’s torque decreases. The result is constant torque at the fusée’s arbor and therefore constant amplitude of the balance.

This complex system can only function flawlessly if three additional precautions are taken. The first one is a system that blocks the winding process just before the mainspring is fully wound and thus prevents the chain from tearing. In this mechanism, the vertical motion of the chain is used to actuate an intricate system of levers that block the ratchet wheel at the right moment.

The second precaution is a mechanism that stops the movement before the mainspring is fully relaxed. This function is assumed by a modified power-reserve wheel that controls a stop lever. After exactly 36 hours, the lever drops into a recess in the wheel. Assisted by a spring, the longer arm of the lever moves into the engagement radius of a specially shaped finger seated on the fourth wheel arbor. The arbor is stopped when the two elements make contact.

The seconds hand stays at the 12 o’clock position. Finally, the fusée-and-chain transmission needs a construction to ensure that the transmission does not stop while the watch is being wound. A complex planetary gearing inside the fusée preserves the power flow from the fusée to the movement during the winding phase. The most interesting details such as the chain, the blocking mechanism, and the ratchet wheel over the fusée that incorporates the planetary gearing are visible through apertures in the lavishly decorated three-quarter plate.

To find the optimised match of the characteristics of the mainspring and of the fusée, the 36-hour working range of the mainspring can be adjusted in the direction of higher or lower torque. This can be done by a service watchmaker with a proprietary Lange tool that engages with a pretensioning ratchet on the mainspring barrel. The setting is locked with a pawl. Located above the three-quarter plate, this mechanism is easily accessible.

RICHARD LANGE Pour le Mérite watch in platinum Reference 260. 025

The exclusive calibre L044.1 movement is powered by an indexless escapement that beats with 21,600 semi-oscillations per hour and has a power reserve of 36 hours when fully wound.

It incorporates a hairspring made in-house, precisely adapted to the oscillation system and the parameters of the movement. In turn, the moment of inertia of the large balance wheel with its 18 inertia and 4 poising screws, all made of solid gold, corresponds exactly to the torque delivered by the fusée.

All components of the complex manually wound movement are crafted to the highest Lange quality standards and lavishly decorated. In addition to the balance cock, the separate escape-wheel and fourth-wheel cock are engraved by hand as well. Lange’s master watchmakers also apply lavish decorations on parts of the movement that are not visible.

Technical details

Model: A. Lange & Söhne RICHARD LANGE Pour le Mérite

Reference 260. 025: Platinum version
Reference 260. 032: Pink gold version

Lange manufacture calibre L044.1, manually wound, fusée and-chain transmission, crafted to the highest Lange quality standards, decorated and assembled by hand; precision adjusted in five positions; three-quarter plate made of untreated German silver; balance as well as escape-wheel and fourth-wheel cocks engraved by hand
No. of movement parts:279 (not including the chain with its 636 parts)
Jewels 33
Screwed gold chatons: 2
Escapement: Lever escapement
Oscillation system: Shock-resistant glucydur screw balance with poising screws, balance spring made in-house, frequency 21,600 semioscillations per hour, precision beat adjustment mechanism with lateral setscrew and whiplash spring
Power reserve :36 hours when fully wound
Movement size: 31.6 x 6.0 millimetres

Time indicated in hours, minutes, small seconds with stop seconds

Operating elements
Crown for winding the watch and setting the time

Material: Pink gold or platinum
Case dimensions : 40.5 x 10.7 millimetres
Glass and caseback: Sapphire crystal (hardness 9)

Three-part enamel dial
Hands: Blued steel

Supple hand-stitched crocodile strap with Lange prong buckle in solid platinum or pink gold

Limited edition of 50 watches in platinum and 200 watches in pink gold

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.