Austrian manufacture Habring Uhrentechnik presents a chronograph watch featuring the innovative COS system. The Crown Operation System, Short COS stands for Habring²’s exclusive patented world novelty. It means a Chronograph which is operable completely without pushers, buttons or other operating devices.
In order to activate the classic stop-function the well known and well tried crown is sufficient – the crown only needs to be turned around against easily felt resistances. The advantages are obvious: less drill-holes in the housing minimise the risk of ingress of water; no more possible damages of the usually very exposed pushers; no unintentionally starting or stopping by simple movements of the wrist; no more hard-steering or even completely frozen pushers due to staining; just a Chronograph with the reliability of a simple three-hand watch.
The COS is based on the newly implemented calibre A08 which again is based on the wheelwork of the ETA-family 7750/7760. Additionally the already well known Habring² improvements are implemented: the Triovis fine regulation, Echappement and balance wheel in chronometer quality as well as appropriate decor. The Chrono COS is available in titanium only with ruthenium-coloured dial.
Model: Habring² – “Chrono COS”
Screwed titanium watchcase made of three parts with 42mm diameter
Water-protected equivalent 50 meter depth
Spherical domed and double sided antireflective coated sapphire crystal
Solid double sealed stainless steel crown
Individually engraved serial number 01 – 200X till 12 – 200X (year of production) between the lugs at 6 o’clock
Rhutenium plated metal dial
Rhodiated applied numerals, hour markers with Superluminova coating
Rhodiated hands with Superluminova coating
Calibre A08COS, manually wound, patented crown-operation-system (COS) for operating the chronograph function by turning the crown
Indication of hours and minutes, small seconds at 9h, chronograph-function with indication of seconds from the center and 30-minutes counter at 3h
Shock-protected according DIN and NIHS
Power reserve after being fully wound: approx. 48 hours
84 maintenance relevant parts
Grey microfibre strap in “Carbon”-design with deployment buckle
Handmade three-part wooden box made from brushed and oiled Oregon-pine with integrated spare part compartment with a set of spares